Ripper
Pry-Out Force
26303 lb 11930.9 kg
Ripping Depth - Maximum
17 in 431.8 mm
Penetration Force
17705 lb 8030.9 kg
Machine Length Increase, Beam Raised
39.2 in 995.7 mm
Ripper Shank Holder Spacing
21 in 533.4 mm
Engine
Engine Model
C6.6 ACERT VHP C6.6 ACERT VHP
Frame
Front Frame Structure - Height
0.9 ft in 254 mm
Front Frame Structure - Width
0.9 ft in 254 mm
Front Frame Structure - Thickness
0.1 ft in 15.3 mm
Engine
Power Measured @
2000 rpm 2000 rpm
Net Power Gears 7-8
138 hp 103 kw
Displacement
403 cu in 6.7 L
Emissions
U.S. EPA Tier 3/EU Stage IIIA equivalent U.S. EPA Tier 3/EU Stage IIIA equivalent
Engine Model
Cat C6.6 ACERT Cat C6.6 ACERT
Note (1)
Maximum torque (VHP Plus) measured at 1,400 rpm. Maximum torque (VHP Plus) measured at 1,400 rpm.
Note (2)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Note (3)
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator.
Note (4)
Power as declared per ISO 14396: Rated Speed = 2,000 rpm; VHP Plus = 175 kW (234 hp) Power as declared per ISO 14396: Rated Speed = 2,000 rpm; VHP Plus = 175 kW (234 hp)
Note (5)
No engine derating required up to 3048 m (10,000 ft). No engine derating required up to 3048 m (10,000 ft).
Derating Altitude
11500 ft in 3505.2 m
Maximum Torque
690 lb ft 935.6 Nm
Base Power (1st Gear) - Net
138 hp 103 kw
Speed At Rated Power
2,000 rpm 2,000 rpm
High - Ambient Capability
122 degrees 122 degrees
Base Power (1st Gear) - Net - Metric
140 hp 104.4 kw
High Ambient - Fan Speed - Maximum
1,650 rpm 1,650 rpm
High Ambient - Fan Speed - Minimum
600 rpm 600 rpm
Vhp Plus Range - Net
103-136 kW (138-182 hp) 103-136 kW (138-182 hp)
Vhp Plus Range - Net - Metric
103-136 kW (140-185 hp) 103-136 kW (140-185 hp)
Frame
Circle - Diameter
60.2 in 1529.1 mm
Drawbar - Height
6 in 152.4 mm
Front Axle - Height To Center
22.5 in 571.5 mm
Circle - Blade Beam Thickness
1.4 in 35.6 mm
Front Axle - Total Oscillation Per Side
32 degrees 32 degrees
Drawbar - Thickness
0.4 in 10.2 mm
Drawbar - Width
3 in 76.2 mm
Front Axle - Wheel Lean - Left/Right
18 degrees 18 degrees
Engine
Torque Rise - Vhp Plus
40% 40%
Base Power (All Gears) - Net
138 hp 103 kw
Standard - Fan Speed - Maximum
1,150 rpm 1,150 rpm
Standard - Fan Speed - Minimum
600 rpm 600 rpm
Standard - Ambient Capability
109 degrees 109 degrees
Vhp Range - Net
103-114 kW (138-153 hp) 103-114 kW (138-153 hp)
Maximum Torque - Vhp Plus - Net
668 lb ft 905.7 Nm
Frame
Drawbar - Yoke Bar Thickness
0.8 in 19.1 mm
Operational
Std Operation Weight - Front Axle
8233 lb 3735 kg
Std Operation Weight - Rear Axle
22836 lb 10358 kg
Hydraulic System Fluid Capacity
15.9 gal 60 L
Std Operation Weight - Total
31069 lb 14093 kg
Max Operation Weight - Front Axle
16312 lb 7399 kg
Max Operation Weight - Rear Axle
28378 lb 12872 kg
Max Operation Weight - Total
44690 lb 20271 kg
Fuel Capacity
90 gal 340 L
Cooling System Fluid Capacity
10.4 gal 40 L
Rear Diff/Final Drive Fluid Capacity
13.2 gal 50 L
Circle Gearbox Fluid Capacity
1.8 gal 7 L
Tandem Case Fluid Capacity (Each)
16.9 gal 61 L
Power Train
Brakes - Parking
Multiple oil disc Multiple oil disc
Brakes - Service
Multiple oil-disc Multiple oil-disc
Transmission
Direct drive, power shift, countershaft Direct drive, power shift, countershaft
Forward/Reverse Gears
8 Fwd / 6 Rev 8 Fwd / 6 Rev
Brakes - Secondary
Dual circuit control system Dual circuit control system
Brakes - Service - Surface Area
3565 in2 2.3 m2
Steering
Articulation Angle
20 degrees 20 degrees
Turning Radius
24.5 ft in 7.5 m
Transmission
Transmission Type
direct drive, power shift, countershaft direct drive, power shift, countershaft
Number Of Gears - Forward
8 8
Number Of Gears - Reverse
6 6
Max Speed - Forward
27.7 mph 44.5 km/h
Max Speed - Reverse
23.5 mph 37.8 km/h
Front Axle
Wheel Lean
18 degrees 18 degrees
Oscillation - Total
32 degrees 32 degrees
Ground Clearance
1.9 ft in 572 mm
Weights
Gross Vehicle Weight - Typically Equipped - Rear Axle
29343 lb 13309.8 kg
Gross Vehicle Weight - Typically Equipped - Front Axle
11221 lb 5089.8 kg
Gross Vehicle Weight - Typically Equipped - Total
40565 lb 18400 kg
Operating Weight - Typically Equipped
40565 lb 18400 kg
Gross Vehicle Weight - Base - Total
35783 lb 16230.9 kg
Gross Vehicle Weight - Maximum - Total
48601 lb 22045.1 kg
Gross Vehicle Weight - Base - Rear Axle
26479 lb 12010.7 kg
Gross Vehicle Weight - Base - Front Axle
9303 lb 4219.8 kg
Gross Vehicle Weight - Maximum - Front Axle
15077 lb 6838.9 kg
Gross Vehicle Weight - Maximum - Rear Axle
33523 lb 15205.8 kg
Hydraulic System
Standby Pressure
450 psi 450 psi
Maximum System Pressure
3500 psi 3500 psi
Moldboard
Moldboard Width
12 ft in 3668 mm
Moldboard Height
24 in 610 mm
Moldboard Thickness
0.9 in 22 mm
Max Depth Of Cut
28.3 in 720 mm
Side Shift Left
20.1 in 510 mm
Side Shift Right
26 in 660 mm
Blade Pull At Max Weight
40221 lb 18244 kg
Blade Down Pressure
28887.2 lb 13103 kg
Hydraulic System
Pump Type
Variable piston Variable piston
Pump Flow
40 gal/min 151 L/min
Relief Valve Pressure
3500 psi 24100 kPa
Circuit Type
Electro-hydraulic load sensing, closed center Electro-hydraulic load sensing, closed center
Pump Output
40 gal/min 40 gal/min
Moldboard
Blade Width
12 ft in 3.7 m
Arc Radius
16.3 in 414.1 mm
Throat Clearance
5.2 in 132.1 mm
Cutting Edge Width
6 in 152.4 mm
Cutting Edge Thickness
0.6 in 15.3 mm
End Bit - Width
6 in 152.4 mm
End Bit - Thickness
0.6 in 15.3 mm
Moldboard - Height
24 in 609.6 mm
Moldboard - Thickness
0.9 in 22.1 mm
Moldboard - Width
12 ft in 3.7 m
Blade Pull - Maximum Gvw
24218 lb 10985.2 kg
Blade Pull - Base Gvw
20350 lb 9230.7 kg
Blade Down Pressure - Base Gvw
16435 lb 7454.8 kg
Blade Down Pressure - Maximum Gvw
29125 lb 13210.9 kg
Circle
Shift Left
25.8 in 656 mm
Shift Right
25.8 in 656 mm
Max Reach Outside Tires - Left
68.6 in 1742 mm
Max Reach Outside Tires - Right
75 in 1905 mm
Max Lift Above Ground
16.8 in 427 mm
Blade Tip Angle - Front
40 degrees 40 degrees
Blade Tip Angle - Rear
5 degrees 5 degrees
Operating Specifications
Top Speed - Forward
27.7 mph 44.6 km/h
Top Speed - Reverse
23.5 mph 37.9 km/h
Turning Radius - Outside Front Tires
24.5 ft in 7.5 m
Steering Range - Left/Right
47.5 degrees 47.5 degrees
Articulation Angle - Left/Right
20 degrees 20 degrees
Forward - 8th
27.7 mph 44.6 km/h
Forward - 7th
19 mph 30.6 km/h
Forward - 6th
13.8 mph 22.3 km/h
Forward - 5th
10.2 mph 16.5 km/h
Forward - 4th
6.5 mph 10.5 km/h
Forward - 3rd
4.8 mph 7.7 km/h
Forward - 2nd
3.3 mph 5.4 km/h
Forward - 1st
2.4 mph 3.9 km/h
Reverse - 6th
23.5 mph 37.9 km/h
Reverse - 5th
16.1 mph 26 km/h
Reverse - 4th
8.6 mph 13.9 km/h
Reverse - 3rd
5.6 mph 9.1 km/h
Reverse - 2nd
3.8 mph 6.2 km/h
Reverse - 1st
2 mph 3.3 km/h
Standards
Brakes
ISO 3450:1996 ISO 3450:1996
Rops/Fops
ISO 3471:1992 / ISO 3449:1992 ISO 3471:1992 / ISO 3449:1992
Sound
ISO 6394:1998 / ISO 6395:1988 ISO 6394:1998 / ISO 6395:1988
Steering
ISO 5010:1992 ISO 5010:1992
Service Refill
Cooling System
8.7 gal 33 L
Engine Oil
3.7 gal 14.1 L
Hydraulic System - Tank
16.9 gal 64 L
Tandem Housing - Each
15.6 gal 59.1 L
Circle Drive Housing
1.8 gal 6.9 L
Front Wheel Spindle Bearing Housing
0.1 gal 0.4 L
Fuel Capacity
90 gal 340.7 L
Transmission - Differential - Final Drives
16.5 gal 62.5 L
Blade Range
Circle Centershift - Right
25.8 in 655.4 mm
Circle Centershift - Left
25.8 in 655.4 mm
Moldboard Sideshift - Right
26 in 660.4 mm
Moldboard Sideshift - Left
20.1 in 510.6 mm
Blade Tip Range - Forward
40 degrees 40 degrees
Blade Tip Range - Backward
5 degrees 5 degrees
Maximum Shoulder Reach Outside Of Tires - Right
75 in 1905 mm
Maximum Shoulder Reach Outside Of Tires - Left
68.6 in 1742.5 mm
Maximum Lift Above Ground
16.8 in 426.8 mm
Maximum Depth Of Cut
28.3 in 718.9 mm
Maximum Blade Position Angle
90 degrees 90 degrees
Scarifier
Rear - Scarifier Shank Holders
9 9
Mid, V-Type - Scarifier Shank Holders
11 11
Front, V-Type, 5 Or 11 Tooth - Working Width
47.4 in 1204 mm
Front, V-Type, 5 Or 11 Tooth - Scarifying Depth, Maximum
18.4 in 467.4 mm
Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holders
5 / 11 5 / 11
Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holder Spacing
4.6 in 116.9 mm
Mid, V-Type - Working Width
46.6 in 1183.7 mm
Mid, V-Type - Scarifying Depth, Maximum
11.5 in 292.1 mm
Mid, V-Type - Scarifier Shank Holder Spacing
4.6 in 116.9 mm
Rear - Working Width
91 in 2311.4 mm
Rear - Scarifying Depth, Maximum
10.5 in 266.7 mm
Rear - Scarifier Shank Holder Spacing
10.5 in 266.7 mm
Mid, Straight - Working Width
71 in 1803.4 mm
Mid, Straight - Scarifier Shank Holder Spacing
4.4 in 111.8 mm
Mid, Straight - Scarifier Shank Holders
17 17
Mid, Straight - Scarifying Depth, Maximum
12.5 in 317.5 mm
Tandems
Sidewall Thickness - Inner
0.5 in 12.7 mm
Sidewall Thickness - Outer
0.6 in 15.3 mm
Drive Chain Pitch
1.8 in 45.8 mm
Wheel Axle Spacing
59.5 in 1511.3 mm
Tandem Oscillation - Front Up
15 degrees 15 degrees
Tandem Oscillation - Front Down
25 degrees 25 degrees