Ripper
Pry-Out Force
26259 lb 11910.9 kg
Ripping Depth - Maximum
16.8 in 426.8 mm
Penetration Force
20540 lb 9316.8 kg
Machine Length Increase, Beam Raised
36.2 in 919.5 mm
Ripper Shank Holder Spacing
21 in 533.4 mm
Engine
Engine Model
C7 ACERT VHP C7 ACERT VHP
Frame
Front Frame Structure - Height
12 ft in 3657.6 mm
Front Frame Structure - Width
12 ft in 3657.6 mm
Front Frame Structure - Thickness
0.6 ft in 182.9 mm
Engine
Power Measured @
2000 rpm 2000 rpm
Max Power
183 hp 136.5 kw
Net Power Gears 7-8
183 hp 136.5 kw
Displacement
439 cu in 7.2 L
Emissions
Emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA. Emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Engine Model
Cat C7 ACERT Cat C7 ACERT
Note (1)
Maximum torque (VHP Plus) measured at 1,000 rpm. Maximum torque (VHP Plus) measured at 1,000 rpm.
Note (2)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Note (3)
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator.
Note (4)
Power as declared per ISO 14396; Rated Speed = 2,000 rpm; VHP Plus = 175 kW (234 hp) Power as declared per ISO 14396; Rated Speed = 2,000 rpm; VHP Plus = 175 kW (234 hp)
Note (5)
No engine derating required up to 3048 m (10,000 ft). No engine derating required up to 3048 m (10,000 ft).
Derating Altitude
10000 ft in 3048 m
Base Power (1st Gear) - Net
183 hp 136.5 kw
Speed At Rated Power
2,000 rpm 2,000 rpm
High - Ambient Capability
122 degrees 122 degrees
Base Power (1st Gear) - Net - Metric
186 hp 138.8 kw
High Ambient - Fan Speed - Maximum
1,650 rpm 1,650 rpm
Maximum Torque - Vhp Plus
855 lb ft 1159.3 Nm
High Ambient - Fan Speed - Minimum
600 rpm 600 rpm
Vhp Plus Range - Net
136-174 kW (183-233 hp) 136-174 kW (183-233 hp)
Vhp Plus Range - Net - Metric
136-174 kW (186-237 hp) 136-174 kW (186-237 hp)
Frame
Circle - Diameter
60.2 in 1529.1 mm
Drawbar - Height
6 in 152.4 mm
Front Axle - Height To Center
23 in 584.2 mm
Circle - Blade Beam Thickness
1.6 in 40.7 mm
Front Axle - Total Oscillation Per Side
32 degrees 32 degrees
Drawbar - Width
3 in 76.2 mm
Front Axle - Wheel Lean - Left/Right
18 degrees 18 degrees
Engine
Torque Rise - Vhp Plus
39% 39%
Standard - Fan Speed - Maximum
1,450 rpm 1,450 rpm
Standard - Fan Speed - Minimum
600 rpm 600 rpm
Standard - Ambient Capability
109 degrees 109 degrees
Operational
Std Operation Weight - Front Axle
9173 lb 4161 kg
Std Operation Weight - Rear Axle
24183 lb 10969 kg
Hydraulic System Fluid Capacity
15.9 gal 60 L
Std Operation Weight - Total
33356 lb 15130 kg
Max Operation Weight - Front Axle
17908 lb 8123 kg
Max Operation Weight - Rear Axle
32967 lb 14954 kg
Max Operation Weight - Total
50875 lb 23077 kg
Fuel Capacity
110 gal 416 L
Cooling System Fluid Capacity
12.4 gal 47 L
Rear Diff/Final Drive Fluid Capacity
17.2 gal 65 L
Circle Gearbox Fluid Capacity
1.8 gal 7 L
Tandem Case Fluid Capacity (Each)
16.9 gal 64 L
Power Train
Brakes - Parking
Multiple oil disc Multiple oil disc
Brakes - Service
Multiple oil disc Multiple oil disc
Transmission
Direct drive, power shift, countershaft Direct drive, power shift, countershaft
Forward/Reverse Gears
8 Forward/6 Reverse 8 Forward/6 Reverse
Brakes - Secondary
Dual circuit control system Dual circuit control system
Brakes - Service - Surface Area
3565 in2 2.3 m2
Steering
Articulation Angle
20 degrees 20 degrees
Turning Radius
25.5 ft in 7.8 m
Transmission
Transmission Type
direct drive, power shift, countershaft direct drive, power shift, countershaft
Number Of Gears - Forward
8 8
Number Of Gears - Reverse
6 6
Max Speed - Forward
29 mph 46.6 km/h
Max Speed - Reverse
22.9 mph 36.8 km/h
Front Axle
Wheel Lean
18 degrees 18 degrees
Oscillation - Total
32 degrees 32 degrees
Ground Clearance
1.9 ft in 571 mm
Weights
Note
Base operating weight calculated on standard machine configuration with 14.00R24 tire with multi-piece rim, full fuel tank, coolant, lubricants and operator. Base operating weight calculated on standard machine configuration with 14.00R24 tire with multi-piece rim, full fuel tank, coolant, lubricants and operator.
Gross Vehicle Weight - Typically Equipped - Rear Axle
30152 lb 13676.8 kg
Gross Vehicle Weight - Typically Equipped - Front Axle
11716 lb 5314.3 kg
Gross Vehicle Weight - Typically Equipped - Total
41868 lb 18991.1 kg
Operating Weight - Typically Equipped
41868 lb 18991.1 kg
Gross Vehicle Weight - Base - Total
36554 lb 16580.7 kg
Gross Vehicle Weight - Typically Equipped
41868 lb 18991.1 kg
Gross Vehicle Weight - Maximum - Total
51893 lb 23538.3 kg
Gross Vehicle Weight - Base - Rear Axle
26993 lb 12243.9 kg
Gross Vehicle Weight - Base - Front Axle
9561 lb 4336.8 kg
Gross Vehicle Weight - Maximum - Front Axle
16606 lb 7532.4 kg
Gross Vehicle Weight - Maximum - Rear Axle
35287 lb 16006 kg
Hydraulic System
Standby Pressure
450 psi 450 psi
Maximum System Pressure
3500 psi 3500 psi
Moldboard
Moldboard Width
12 ft in 3700 mm
Moldboard Height
24 in 610 mm
Moldboard Thickness
0.9 in 22 mm
Max Depth Of Cut
28.1 in 715 mm
Side Shift Left
20.1 in 510 mm
Side Shift Right
26 in 660 mm
Blade Pull At Max Weight
45787.8 lb 20769 kg
Hydraulic System
Pump Type
Variable piston Variable piston
Pump Flow
55.7 gal/min 210 L/min
Relief Valve Pressure
3500 psi 24150 kPa
Circuit Type
Electro-hydraulic load sensing, closed center Electro-hydraulic load sensing, closed center
Note
Pump output measured at 2,150 rpm. Pump output measured at 2,150 rpm.
Pump Output
55.7 gal/min 55.7 gal/min
Moldboard
Blade Width
12 ft in 3.7 m
Arc Radius
16.3 in 414.1 mm
Throat Clearance
6.5 in 165.1 mm
Cutting Edge Width
6 in 152.4 mm
Cutting Edge Thickness
0.6 in 15.3 mm
End Bit - Width
6 in 152.4 mm
End Bit - Thickness
0.6 in 15.3 mm
Moldboard - Height
24 in 609.6 mm
Moldboard - Thickness
0.9 in 22.1 mm
Moldboard - Width
12 ft in 3.7 m
Note
Blade pull calculated at 0.9 traction coefficient, which is equal to no-slip conditions, and Gross Vehicle Weight (GVW). Blade pull calculated at 0.9 traction coefficient, which is equal to no-slip conditions, and Gross Vehicle Weight (GVW).
Blade Pull - Maximum Gvw
31758 lb 14405.2 kg
Blade Pull - Base Gvw
24294 lb 11019.6 kg
Down Pressure - Maximum Gvw
28503 lb 12928.8 kg
Down Pressure - Base Gvw
16410 lb 7443.5 kg
Circle
Shift Left
27.4 in 695 mm
Shift Right
28.7 in 728 mm
Max Reach Outside Tires - Left
70.5 in 1790 mm
Max Reach Outside Tires - Right
77.9 in 1978 mm
Max Lift Above Ground
18.9 in 480 mm
Blade Tip Angle - Front
40 degrees 40 degrees
Blade Tip Angle - Rear
5 degrees 5 degrees
Operating Specifications
Top Speed - Forward
29 mph 46.7 km/h
Top Speed - Reverse
22.9 mph 36.9 km/h
Turning Radius - Outside Front Tires
25 ft in 7.6 m
Steering Range - Left/Right
47.5 degrees 47.5 degrees
Articulation Angle - Left/Right
20 degrees 20 degrees
Forward - 8th
29 mph 46.7 km/h
Forward - 7th
19.9 mph 32.1 km/h
Forward - 6th
14.5 mph 23.4 km/h
Forward - 5th
10.6 mph 17.1 km/h
Forward - 4th
6.8 mph 11 km/h
Forward - 3rd
5 mph 8.1 km/h
Forward - 2nd
3.4 mph 5.5 km/h
Forward - 1st
2.5 mph 4.1 km/h
Reverse - 6th
22.9 mph 36.9 km/h
Reverse - 5th
15.7 mph 25.3 km/h
Reverse - 4th
8.4 mph 13.6 km/h
Reverse - 3rd
5.4 mph 8.7 km/h
Reverse - 2nd
3.7 mph 6 km/h
Reverse - 1st
2 mph 3.3 km/h
Standards
Brakes
ISO 3450:1996 ISO 3450:1996
Rops/Fops
ISO 3471:2008, ISO 3449:2005 Level II ISO 3471:2008, ISO 3449:2005 Level II
Sound
ISO 6394:2008, ISO 6395:2008 ISO 6394:2008, ISO 6395:2008
Note (1)
The static sound operator pressure level measured according to ISO 6394:2008 for a cab offered by Caterpillar, when properly installed, maintained and tested with doors and windows closed and hydraulic fan at maximum speed is 74 dB(A). The static sound operator pressure level measured according to ISO 6394:2008 for a cab offered by Caterpillar, when properly installed, maintained and tested with doors and windows closed and hydraulic fan at maximum speed is 74 dB(A).
Steering
ISO 5010:2007 ISO 5010:2007
Service Refill
Cooling System
10.6 gal 40.2 L
Hydraulic System - Tank
16.9 gal 64 L
Tandem Housing - Each
16.9 gal 64 L
Circle Drive Housing
1.8 gal 6.9 L
Front Wheel Spindle Bearing Housing
0.2 gal 0.5 L
Fuel Capacity
110 gal 416.4 L
Transmission - Differential - Final Drives
16.9 gal 64 L
Blade Range
Circle Centershift - Right
28.7 in 729 mm
Circle Centershift - Left
27.4 in 696 mm
Moldboard Sideshift - Right
26 in 660.4 mm
Moldboard Sideshift - Left
20.1 in 510.6 mm
Blade Tip Range - Forward
40 degrees 40 degrees
Blade Tip Range - Backward
5 degrees 5 degrees
Maximum Shoulder Reach Outside Of Tires - Right
77.9 in 1978.7 mm
Maximum Shoulder Reach Outside Of Tires - Left
70.5 in 1790.7 mm
Maximum Lift Above Ground
18.9 in 480.1 mm
Maximum Depth Of Cut
28.1 in 713.8 mm
Maximum Blade Position Angle
90 degrees 90 degrees
Scarifier
Rear - Scarifier Shank Holders
9 9
Mid, V-Type - Scarifier Shank Holders
11 11
Front, V-Type, 5 Or 11 Tooth - Working Width
47.4 in 1204 mm
Front, V-Type, 5 Or 11 Tooth - Scarifying Depth, Maximum
18.4 in 467.4 mm
Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holders
5, 11 5, 11
Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holder Spacing
4.6 in 116.9 mm
Mid, V-Type - Working Width
46.6 in 1183.7 mm
Mid, V-Type - Scarifying Depth, Maximum
11.5 in 292.1 mm
Mid, V-Type - Scarifier Shank Holder Spacing
4.6 in 116.9 mm
Rear - Working Width
91 in 2311.4 mm
Rear - Scarifying Depth, Maximum
10.5 in 266.7 mm
Rear - Scarifier Shank Holder Spacing
10.5 in 266.7 mm
Tandems
Sidewall Thickness - Inner
0.6 in 15.3 mm
Sidewall Thickness - Outer
0.7 in 17.8 mm
Drive Chain Pitch
2 in 50.8 mm
Wheel Axle Spacing
60 in 1524 mm
Tandem Oscillation - Front Up
15 degrees 15 degrees
Tandem Oscillation - Front Down
25 degrees 25 degrees
Net Power - Vhp Plus
Gear - Forward 1st
183 hp 136.5 kw
Gear - Forward 2nd
188 hp 140.2 kw
Gear - Forward 3rd
203 hp 151.4 kw
Gear - Forward 4th
208 hp 155.2 kw
Gear - Forward 5th
213 hp 158.9 kw
Gear - Forward 6th
218 hp 162.6 kw
Gear - Forward 7th
233 hp 173.8 kw
Gear - Forward 8th
233 hp 173.8 kw
Gear - Reverse 1st
183 hp 136.5 kw
Gear - Reverse 2nd
188 hp 140.2 kw
Gear - Reverse 3rd-6th
203 hp 151.4 kw
