Caterpillar 236D Skid Steer Loader Dimensions & Specs

Picture of a Caterpillar 236D Skid Steer Loader

Transport a Caterpillar 236D Skid Steer Loader

Transporting a Caterpillar 236D Skid Steer Loader is a process that involves multiple steps, each requiring careful attention and expertise. First, the Caterpillar 236D Skid Steer Loader is prepared for transport, which may involve disassembling larger components and securing fragile parts.During the loading phase, special equipment like forklifts or cranes may be used

Dimensions

ALength With Bucket

11.45 ft in 3487.22 mm

BWidth Over Tires

5.5 ft in 1676.4 mm

EGround Clearance

7.7 in 195.58 mm

CHeight To Top Of Cab

6.83 ft in 2081.79 mm

DWheelbase

3.63 ft in 1104.91 mm

FLength W/O Bucket

9.08 ft in 2766.06 mm

GClearance At Max Lift And Dump

7.75 ft in 2359.64 mm

HReach At Max Lift And Dump

16 in 406.4 mm

Length - With Bucket On Ground

137.31 in 3487.42 mm

Length - Without Bucket

108.9 in 2766.06 mm

Maximum Overall Height

156.6 in 3977.64 mm

Maximum Reach - With Arms Parallel To Ground

53.3 in 1353.82 mm

Rack Back Angle - Maximum Height

91 degrees 91 degrees

Maximum Dump Angle

48 degrees 48 degrees

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Bucket Pin Height - Carry Position

7.5 in 190.5 mm

Bucket Pin Height - Maximum Lift

10.25 ft in 0.27 m

Bumper Overhang - Behind Rear Axle

40.21 in 1021.08 mm

Clearance At Maximum Lift And Dump

92.9 in 2359.66 mm

Departure Angle

26 degrees 26 degrees

Height - Top Of Cab

6.84 ft in 0.18 m

Turn Radius From Center - Coupler

51.8 in 1315.72 mm

Turn Radius From Center - Machine Rear

64.5 in 1638.3 mm

Turning Radius From Center - Inc Bucket

85.24 in 2165 mm

Vehicle Width Over Tires

66 in 1676.4 mm

Wheel Base

3.63 ft in 0.1 m

Reach - Maximum Lift/Dump

16 in 406.4 mm

Turn Radius From Center - Bucket

83 in 2108.2 mm

Operating Specifications

Rated Operating Capacity With Optional Counterweight

2000 lb 907.19 kg

Breakout Force - Tilt Cylinder

5074 lb 2301.53 kg

Rated Operating Capacity

1800 lb 816.47 kg

Tipping Load

3600 lb 1632.94 kg

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Specifications

Engine

Engine Make

2236 2236

Engine Model

Cat 3.3B DIT (Turbo) Cat 3.3B DIT (Turbo)

Gross Power

74.3 hp 55.5 kw

Displacement

203 cu in 3.4 L

Bore

3.7 in 94 mm

Stroke

4.7 in 119.4 mm

Net Power - Iso 9249

73.9 hp 55.2 kw

Gross Power - Sae J1995

74.3 hp 55.5 kw

Engine Model

Cat C3.3B DIT (turbo) Cat C3.3B DIT (turbo)

Net Power - Sae 1349

73.2 hp 54.6 kw

Peak Torque - 1,500 Rpm - Sae J1995

195 lb ft 264.4 Nm

Net Flywheel Power

73.2 hp 54.6 kw

Operational

Operational Weight

6559 lb 2975.2 kg

Fuel Capacity

27.7 gal 104.9 L

Cooling System Fluid Capacity

3.7 gal 14.1 L

Hydraulic System Fluid Capacity

13.2 gal 50 L

Max Speed

10.6 mph 17.1 km/h

Chain Box Fluid Capacity - Each Side

2.3 gal 8.8 L

Operating Speed

7 mph 11.3 km/h

Power Train

Travel Speed - Forward Or Reverse - One Speed

7 mph 11.3 km/h

Travel Speed - Forward Or Reverse - Two Speed Option

10.6 mph 17.1 km/h

Loader

Breakout Force

5074 lb 2301.6 kg

Tipping Angle

3600 degrees 3600 degrees

Weights

Operating Weight

6559 lb 2975.2 kg

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Hydraulic

Pump Flow Capacity

20 gal/min 75.8 L/min

Relief Valve Pressure

3335 psi 22994 kPa

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Pressure

3335 psi 3335 psi

Hydraulic Flow - Standard - Loader Hydraulic Flow

20 gal/min 20 gal/min

Hydraulic Flow - Standard - Hydraulic Power (Calculated)

39 hp 29.1 kw

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)

58 hp 43.3 kw

Hydraulic Flow - High Flow - Loader Hydraulic Pressure

3335 psi 3335 psi

Hydraulic Flow - High Flow - Loader Hydraulic Flow

30 gal/min 30 gal/min

Service Refill Capacities

Cooling System

3.7 gal 14.1 L

Fuel Tank

27.7 gal 104.9 L

Hydraulic Tank

10.3 gal 39 L

Engine Crankcase

3 gal 11.4 L

Hydraulic System

13.2 gal 50 L

Chain Box - Each Side

2.3 gal 8.8 L

Cab

Rops

ISO 3471:2008 ISO 3471:2008

Fops

ISO 3449:2005 Level I ISO 3449:2005 Level I

Fops Level Ii

ISO 3449:2005 Level II ISO 3449:2005 Level II

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Inside Cab*

83 dB(A) 83 dB(A)

Outside Cab**

101 dB(A) 101 dB(A)

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (2)

*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Note (3)

**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.