This is a Breadcrum

Caterpillar 730 Articulated Dump Truck Dimensions & Specs

Picture of a Caterpillar 730 Articulated Dump Truck
Picture of a Caterpillar 730 Articulated Dump Truck
Picture of a Caterpillar 730 Articulated Dump Truck

Transport a Caterpillar 730 Articulated Dump Truck

Transporting a Caterpillar 730 Articulated Dump Truck is a process that involves multiple steps, each requiring careful attention and expertise. First, the Caterpillar 730 Articulated Dump Truck is prepared for transport, which may involve disassembling larger components and securing fragile parts.During the loading phase, special equipment like forklifts or cranes may be used

Read more

Dimensions

Dimensions
AOverall Length
32.55 ft in
BOverall Width
9.44 ft in
COverall Height
11.29 ft in
DWheelbase
15.32 ft in
EGround Clearance
1.63 ft in
FDump Height
21.33 ft in
GDump Ground Clearance
1.83 ft in
Dump
Lower Time
12 sec
Capacity - Heaped
22.11 yd3
Capacity - Struck
17.14 yd3
Rated Payload
61949.9 lb
Raise Time
12 sec

Specifications

Engine
Number Of Cylinders
6
Engine Make
2236
Engine Model
C11 with ACERT Technology
Gross Power
329 hp
Net Power
325 hp
Aspiration
Turbochaarged
Displacement
762.8 cu in
Bore
5.1 in
Stroke
6.2 in
Emissions
The 730 meets Tier 4 Final/Stage IV emission standards.
Net Power - Iso 9249
321 hp
Net Power - Sae J1349
367 hp
Gross Power - Sae J1995
375 hp
Engine Model
Cat C13 ACERT
Net Power - Iso 14396
370 hp
Note (1)
The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (2)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (3)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Net Power - Eec 80/1269
321 hp
Note (5)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (Sae J1995)
1579 lb ft
Peak Engine Torque Speed
1200 rpm
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv
Cat C13 ACERT
Peak Engine Torque Net (Sae J1349)
1564 lb ft
No Engine De-Rating Below
12500 ft in
Operational
Fuel Capacity
95.2 gal
Hydraulic System Fluid Capacity
27 gal
Cooling System Fluid Capacity
22.5 gal
Engine Oil Capacity
9.8 gal
Transmission Fluid Capacity
9.6 gal
Tire Size
23.5R25
Transmission
Number Of Forward Gears
6
Number Of Reverse Gears
1
Max Speed
34.4 mph
Forward - 1
5 mph
Forward - 2
9 mph
Forward - 3
14 mph
Forward - 4
21 mph
Forward - 5
29 mph
Forward - 6
34 mph
Reverse - 1
6 mph
Steering
Lock To Lock
4.75 seconds @ 60 rpm
Weights
Front Axle - Empty
28968.8 lb
Center Axle - Empty
11023.2 %
Rear Axle - Empty
10383.8 lb
Front Axle - Loaded
34965.4 %
Center Axle - Loaded
39021.9 %
Rear Axle - Loaded
38382.5 lb
Total Empty
50375.7 lb
Total Loaded
112369.7 lb
Service Refill Capacities
Cooling System
21.9 gal
Fuel Tank
108.8 gal
Def Tank
5.3 gal
Engine Crankcase
10 gal
Transmission
12.4 gal
Hydraulic System
29.1 gal
Final Drives/Differential
33 gal
Output Transfer Gear Box
6.3 gal
Standards
Cab - Fops
ISO 3449 Level II 2005
Cab - Rops
ISO 3471 2008
Brakes
ISO 3450 2011
Steering
ISO 5010 2007
Operating Weights
Front Axle - Empty
33069 lb
Center Axle - Empty
10053 lb
Rear Axle - Empty
9568 lb
Total - Empty
52690 lb
Front Axle - Rated Load
7231 lb
Center Axle - Rated Load
27249 lb
Rear Axle - Rated Load
27249 lb
Total - Rated Load
61729 lb
Front Axle - Loaded
40300 lb
Center Axle - Loaded
37302 lb
Rear Axle - Loaded
36817 lb
Total - Loaded
114420 lb
Sound Levels
Interior Cab
72 dB(A)
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Turning Circle
Note
Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Sae Turning Radius
294 in
Turning Dimensions - Clearance Radius
318 in
Turning Dimensions - Inside Radius
153 in
Turning Dimensions - Aisle Width
210 in
Body Capacities
Heaped (Sae 2:1)
23 yd3
Struck
17.4 yd3
Tailgate Struck
18.2 yd3
Tailgate Heaped Sae 2:1
24.6 yd3
Body Hoist
Raise Time
12 s
Lower Time
8 s
Body Plate Thickness
Front
0.4 in
Scow
0.6 in
Side
0.5 in
Base
0.6 in
Front Plate
0.3 in
Base Plate
0.6 in
Side Plates
0.5 in
Body Plate
Body Plate Type
High strength Brinell HB450 wear resistant steel
Optimal Loader/Truck Pass Matching
Note
An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Hydraulic Excavators: 349f/349f Xe - Passes
45
Hydraulic Excavators: 336f/336f Xe - Passes
56
Wheel Loaders: 972m/972m Xe - Passes
34
Wheel Loaders: 966m/966m Xe - Passes
4
Wheel Loader: 962m - Passes
45
Wheel Loader: 950m - Passes
5

Need to transport this equipment?

Click below to get an estimate on shipping this equipment