Engine
Engine Model
C15 with ACERT Technology C15 with ACERT Technology
Gross Power
413 hp 308 kw
Net Power
394 hp 293.9 kw
Max Torque
1524.6 lb ft 2067 Nm
Torque Measured @
1200 rpm 1200 rpm
Aspiration
Turbocharged Turbocharged
Displacement
926 cu in 15.2 L
Emissions
The 735 meets Tier 4 Final/Stage IV emission standards. The 735 meets Tier 4 Final/Stage IV emission standards.
Net Power - Iso 9249
424 hp 316.2 kw
Net Power - Sae J1349
419 hp 312.5 kw
Gross Power - Sae J1995
435 hp 324.4 kw
Engine Model
Cat C15 ACERT Cat C15 ACERT
Flywheel Power
385 hp 287.1 kw
Net Power - Iso 14396
429 hp 320 kw
Note (1)
The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (2)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (3)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Net Power - Eec 80/1269
424 hp 316.2 kw
Note (5)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (Sae J1995)
1614 lb ft 2188.3 Nm
Peak Engine Torque Speed
1200 rpm 1200 rpm
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv
Cat C13 ACERT Cat C13 ACERT
Peak Engine Torque Net (Sae J1349)
1597 lb ft 2165.3 Nm
No Engine De-Rating Below
12500 ft in 3810 m
Operational
Fuel Capacity
148 gal 560 L
Hydraulic System Fluid Capacity
61.6 gal 233 L
Cooling System Fluid Capacity
21.2 gal 80 L
Engine Oil Capacity
10.1 gal 38 L
Transmission Fluid Capacity
19.1 gal 72 L
Tire Size
26.5R25 26.5R25
Transmission
Number Of Forward Gears
8 8
Number Of Reverse Gears
1 1
Max Speed
36.3 mph 58.3 km/h
Forward - 1
5.2 mph 8.3 km/h
Forward - 2
7.1 mph 11.4 km/h
Forward - 3
9.6 mph 15.4 km/h
Forward - 4
12.9 mph 20.7 km/h
Forward - 5
17.5 mph 28.1 km/h
Forward - 6
23.5 mph 37.8 km/h
Forward - 7
31.9 mph 51.3 km/h
Reverse - 2
6.8 mph 10.9 km/h
Steering
Lock To Lock
4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm
Weights
Center Axle - Empty
14087.6 % 14087.5393 %
Front Axle - Empty
40014 lb 18150 kg
Rear Axle - Empty
12588.4 lb 5710 kg
Front Axle - Loaded
48479.7 % 48479.6542 %
Center Axle - Loaded
45900.3 % 45900.2456 %
Rear Axle - Loaded
44401.2 lb 20140 kg
Total Empty
66689.9 lb 30250 kg
Total Loaded
138781.1 lb 62950 kg
Service Refill Capacities
Cooling System
25.1 gal 95.1 L
Fuel Tank
148 gal 560.3 L
Engine Crankcase
10.6 gal 40.2 L
Transmission
22.5 gal 85.2 L
Hydraulic System
86.6 gal 327.9 L
Final Drives/Differential
21.1 gal 79.9 L
Output Transfer Gear Box
6.3 gal 23.9 L
Standards
Cab - Fops
SAE J231 JAN81 and ISO 3449-1992 Level II SAE J231 JAN81 and ISO 3449-1992 Level II
Cab - Rops
SAE J1040 May 1994 and ISO 3471-1994 SAE J1040 May 1994 and ISO 3471-1994
Brakes
SAE J/ISO 3450-1998 SAE J/ISO 3450-1998
Steering
ISO 5010 1992E ISO 5010 1992E
Operating Weights
Front Axle - Empty
41881 lb 18997 kg
Center Axle - Empty
14406 lb 6534.5 kg
Rear Axle - Empty
12919 lb 5860 kg
Total - Empty
69206 lb 31391.4 kg
Front Axle - Rated Load
7417 lb 3364.3 kg
Center Axle - Rated Load
32337 lb 14667.9 kg
Rear Axle - Rated Load
32337 lb 14667.9 kg
Total - Rated Load
72091 lb 32700 kg
Front Axle - Loaded
49298 lb 22361.2 kg
Center Axle - Loaded
46743 lb 21202.3 kg
Rear Axle - Loaded
45256 lb 20527.8 kg
Total - Loaded
141297 lb 64091.3 kg
Sound Levels
Interior Cab
79 dB(A) 79 dB(A)
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Turning Circle
Note
Dimensions are for machines equipped with 750/65 R25 tires. Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Sae Turning Radius
294 in 7467.6 mm
Turning Dimensions - Clearance Radius
318 in 8077.2 mm
Turning Dimensions - Inside Radius
149 in 3784.6 mm
Turning Dimensions - Aisle Width
212 in 5384.8 mm
Body Capacities
Heaped (Sae 2:1)
25.8 yd3 19.8 m3
Tailgate Struck
19.9 yd3 15.3 m3
Tailgate Heaped Sae 2:1
27.3 yd3 20.9 m3
Heaped Sae 1:1
32 yd3 24.5 m3
Body Hoist
Body Plate Thickness
Front Plate
0.3 in 7.2 mm
Body Plate
Body Plate Type
High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel
Optimal Loader/Truck Pass Matching
Note
An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Hydraulic Excavators: 349f/349f Xe - Passes
45 45
Hydraulic Excavators: 336f/336f Xe - Passes
56 56
Wheel Loaders: 972m/972m Xe - Passes
34 34
Wheel Loaders: 966m/966m Xe - Passes
4 4
Wheel Loader: 962m - Passes
45 45
Wheel Loader: 950m - Passes
5 5