Engine
Engine Model
3176C ATAAC 3176C ATAAC
Gross Power
254 hp 189.5 kw
Power Measured @
2100 rpm 2100 rpm
Displacement
628.6 cu in 10.3 L
Net Power - Iso 9249
240 hp 179 kw
Engine Model
Cat 3176C ATAAC Cat 3176C ATAAC
Flywheel Power
240 hp 179 kw
Net Power - Eec 80/1269
240 hp 179 kw
Net Power - Sae J1349 (Jan90)
240 hp 179 kw
Operational
Operating Weight
47869 lb 21713 kg
Fuel Capacity
117.9 gal 446 L
Cooling System Fluid Capacity
14.6 gal 55 L
Engine Oil Capacity
9 gal 34 L
Transmission Fluid Capacity
13.3 gal 50 L
Hydraulic System Fluid Capacity
23.3 gal 88 L
Front Diff Fluid Capacity
17.2 gal 65 L
Rear Diff Fluid Capacity
17.2 gal 65 L
Steering Angle
30 degrees 30 degrees
Axle Oscillation
12 degrees 12 degrees
Operating Voltage
24 V 24 V
Alternator Supplied Amperage
70 amps 70 amps
Tire Size
23.5-25 12PR 23.5-25 12PR
Transmission
Number Of Forward Gears
4 4
Number Of Reverse Gears
4 4
Max Speed - Forward
19.3 mph 30.9 km/h
Max Speed - Reverse
21.9 mph 35.1 km/h
Forward - 1
3.6 mph 5.8 km/h
Forward - 2
6.3 mph 10.2 km/h
Forward - 3
10.9 mph 17.6 km/h
Forward - 4
19.2 mph 30.9 km/h
Reverse - 1
4.1 mph 6.6 km/h
Reverse - 2
7.1 mph 11.5 km/h
Reverse - 3
12.5 mph 20.2 km/h
Reverse - 4
21.8 mph 35.1 km/h
Steering
Turning Radius - With Straight Blade
15.6 ft in 4.8 m
Weights
Operating Weight
47877 lb 21716.7 kg
Tires
Standard Tire Size
23.5-25,12PR 23.5-25,12PR
Tires
4 options available 4 options available
Blade
Blade Capacity
3.5 yd3 2.7 m3
Hydraulic System
Relief Valve Setting
2255 psi 2255 psi
Blade
Blade Width
11.8 ft in 3596 mm
Blade Height
3.7 ft in 1110 mm
Axles
Rear
Oscillating 12 degrees Oscillating 12 degrees
Maximum Single-Wheel Rise And Fall
18.4 in 467.2 mm
Hydraulic System
Lift Cylinder, Bore And Stroke
120.65 mm x 913.9 mm 4.74 in x 35.98 in 120.65 mm x 913.9 mm 4.74 in x 35.98 in
Steering Cylinder, Bore And Stroke
101.6 mm x 597 mm 3.99 in x 23.5 in 101.6 mm x 597 mm 3.99 in x 23.5 in
Brakes
Brakes
Meet OSHA regulations Meet OSHA regulations
Service Refill Capacities
Cooling System
14.5 gal 54.9 L
Hydraulic Tank
23.2 gal 87.9 L
Fuel Tank - Standard
117.8 gal 446 L
Transmission
13.2 gal 50 L
Differential - Final Drives - Front
17.1 gal 64.8 L
Differential - Final Drives - Rear
17.1 gal 64.8 L
Cab
Rops/Fops
Meets SAE and ISO standards Meets SAE and ISO standards
Sound Performance
Standards
Meet required standards Meet required standards
Blade Specifications
Straight Blade - Capacity
3.5 yd3 2.7 m3
Blade Capacities
2.66 m3 3.49 yd3 2.66 m3 3.49 yd3
Moldboard - Length
11.8 ft in 3.6 m
Blade Tip Angle - Total
51.9 degrees 51.9 degrees
Blade Tip Angle - Forward
10 degrees 10 degrees
Blade Tip Angle - Back
4.5 degrees 4.5 degrees
Blade Tilt Angle - Right
4.5 degrees 4.5 degrees
Blade Tilt Angle - Left
8 degrees 8 degrees
Maximum Lift Above Ground
2.4 ft in 0.8 m
Straight Blade - Overall Width
11.8 ft in 3.6 m
Straight Blade - Height
3.6 ft in 1.1 m
Straight Blade - Digging Depth
1.8 ft in 0.6 m
Straight Blade - Ground Clearance
2.4 ft in 0.8 m
Straight Blade - Maximum Tilt
2.6 ft in 0.8 m