Engine
Engine Model
C15 diesel with ACERT Technology C15 diesel with ACERT Technology
Gross Power
401 hp 299.1 kw
Displacement
927.6 cu in 15.2 L
Engine Model
Cat C15 ACERT Cat C15 ACERT
Flywheel Power
354 hp 264 kw
Peak Torque - Gross
1387 lb ft 1880.6 Nm
Operational
Operating Weight
81498 lb 36966.9 kg
Fuel Capacity
177.6 gal 672 L
Hydraulic System Fluid Capacity
23.3 gal 88.1 L
Engine Oil Capacity
9 gal 34 L
Cooling System Fluid Capacity
21.7 gal 82 L
Transmission Fluid Capacity
16.4 gal 62.1 L
Transmission
Number Of Forward Gears
2 2
Number Of Reverse Gears
2 2
Max Speed
6.6 mph 10.6 km/h
Forward - 1
3.6 mph 5.8 km/h
Forward - 2
6.1 mph 9.8 km/h
Reverse - 1
4.1 mph 6.6 km/h
Reverse - 2
6.6 mph 10.7 km/h
Wheels
Front Wheels Drum Width
47.3 in 1200 mm
Weights
Operating Weight
81498 lb 36966.9 kg
Wheels
Front Wheels Drum Diameter
60.4 in 1532 mm
Rear Wheels Drum Width
47.3 in 1200 mm
Rear Wheels Drum Diameter
60.4 in 1532 mm
Blade
Blade Capacity
17.1 yd3 13 m3
Hydraulic System
Relief Valve Setting
3506.29 psi 3506.29 psi
Blade
Axles
Front
Planetary - Fixed Planetary - Fixed
Hydraulic System
Lift Cylinder Bore X Stroke
120.65 mm 915 mm (4.74 in 36.02 in) 120.65 mm 915 mm (4.74 in 36.02 in)
Axles
Oscillating Rear
5 degrees 5 degrees
Hydraulic System
Vane Pump Output At 2,000 Rpm And 6900 Kpa (1,000 Psi)
93 gal/min 93 gal/min
Brakes
Standards
Meet OSHA, SAE J1473 DEC84, ISO 3450:1985 standards Meet OSHA, SAE J1473 DEC84, ISO 3450:1985 standards
Service Refill Capacities
Cooling System
21.7 gal 82 L
Fuel Tank
177.6 gal 672 L
Hydraulic Tank
23.3 gal 88.1 L
Transmission
16.4 gal 62.1 L
Differential - Final Drives - Front
23.8 gal 90.1 L
Differential - Final Drives - Rear
23.8 gal 90.1 L
Cab
Rops/Fops
Meets SAE and ISO standards Meets SAE and ISO standards
Sound Performance
Standards
Meet ANSI/SAE and ISO standards Meet ANSI/SAE and ISO standards
Straight Blade
Width - Over End Bits
14.8 ft in 4.6 m
Moldboard - Length
14.2 ft in 4.4 m
Wheels - Chevron-Pattern, Chopper Blades
Drum Diameter
5.1 ft in 1.6 m
Diameter - With Blades
6.1 ft in 1.9 m
Hydraulic Steering System
Piston Pump Output At 2,000 Rpm And 7000 Kpa (1,015 Psi)
49 gal/min 49 gal/min
Relief Valve Setting
3499 psi 3499 psi
Steering Cylinder, Bore And Stroke
114.3 mm 576 mm (4.49 in 22.68 in) 114.3 mm 576 mm (4.49 in 22.68 in)
Steering Angle
42 degrees 42 degrees
Step Tips
Diameter - With Tips
6.2 ft in 1.9 m
Semi U-Blade
Width - Over End Bits
14.8 ft in 4.5 m
Moldboard - Straight Length
12 ft in 3.7 m
Moldboard - Semi U-Length
1.6 ft in 0.5 m
Semi U-Angle
25 degrees 25 degrees
U-Blade
Capacity
21.9 yd3 16.7 m3
Width - Over End Bits
14.5 ft in 4.4 m
Moldboard - Straight Length
6.9 ft in 2.1 m
Moldboard - U-Length
4.1 ft in 1.3 m
U-Angle
25 degrees 25 degrees