Engine
Number Of Cylinders
12 12
Engine Model
C32 Acert C32 Acert
Gross Power
907 hp 676.4 kw
Net Power
800.6 hp 597 kw
Power Measured @
1750 rpm 1750 rpm
Rated Speed
1750 rpm 1750 rpm
Net Torque
3129 lb ft 4242.4 Nm
Displacement
1958.9 cu in 32.1 L
Aspiration
turbocharged turbocharged
Engine Model
Cat C32 ACERT Cat C32 ACERT
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)
Net torque rise meets SAE J139. Net torque rise meets SAE J139.
Note (3)
No engine derating required up to 3050 m (10,000 ft) altitude. No engine derating required up to 3050 m (10,000 ft) altitude.
Peak Torque - 1,200 Rpm
3139 lb ft 4256 Nm
Emissions (U.S. Epa Tier 4 Final): Gross Power - Sae J1995
900 hp 671.2 kw
Emissions (Tier 2 Equivalent): Gross Power - Sae J1995
907 hp 676.4 kw
Emissions (U.S. Epa Tier 4 Final): Net Power Iso - 9249
814 hp 607 kw
Emissions (Tier 2 Equivalent): Net Power Iso - 9249
814 hp 607 kw
Operational
Operating Weight
217128.9 lb 98488 kg
Fuel Capacity
412.7 gal 1562 L
Cooling System Fluid Capacity
52.9 gal 200 L
Engine Oil Capacity
31.8 gal 120 L
Transmission Fluid Capacity
44.7 gal 169 L
Front Diff Fluid Capacity
97.5 gal 369 L
Rear Diff Fluid Capacity
90.4 gal 342 L
Operating Voltage
24 V 24 V
Alternator Supplied Amperage
150 amps 150 amps
Tire Size
45/65-R45 45/65-R45
Transmission
Transmission Type
Cat Planetary Power Shift Cat Planetary Power Shift
Transmission Type
Planetary power shift Planetary power shift
Number Of Forward Gears
3 3
Number Of Reverse Gears
3 3
Max Speed - Forward
13.2 mph 21.2 km/h
Max Speed - Reverse
14.7 mph 23.5 km/h
Note
Travel speeds based on 45/65-45 L-5 46 ply tires. Travel speeds based on 45/65-45 L-5 46 ply tires.
Direct Drive - Forward 3
14.2 mph 22.9 km/h
Direct Drive - Reverse 3
15.6 mph 25.2 km/h
Direct Drive - Forward 2
8.1 mph 13.1 km/h
Direct Drive - Reverse 2
8.9 mph 14.4 km/h
Steering
Total Steering Angle
86 degrees 86 degrees
Transmission
Converter Drive - Forward 3
13.2 mph 21.3 km/h
Converter Drive - Reverse 3
14.6 mph 23.5 km/h
Direct Drive - Forward 1
Lock-up disabled Lock-up disabled
Converter Drive - Forward 1
4.4 mph 7.1 km/h
Converter Drive - Forward 2
7.7 mph 12.4 km/h
Direct Drive - Reverse 1
5 mph 8.1 km/h
Converter Drive - Reverse 1
4.8 mph 7.8 km/h
Converter Drive - Reverse 2
8.4 mph 13.6 km/h
Steering
Relief Valve Setting
5004 psi 5004 psi
Hydraulic Output At 1,850 Rpm And 6900 Kpa (1,000 Psi)
124 gal/min 124 gal/min
Minimum Turning Radius
31 ft in 9.5 m
Weights
Operating Weight
224254 lb 101720 kg
Blade
Blade Capacity
33.3 yd3 25.4 m3
Blade Width
20.8 ft in 6321 mm
Blade Height
7.2 ft in 2179 mm
Axles
Rear
Oscillating at 10 degrees Oscillating at 10 degrees
Maximum Single-Wheel Rise And Fall
22.6 in 574.1 mm
Brakes
Brakes
Meets ISO 3540:2011 Meets ISO 3540:2011
Service Refill Capacities
Cooling System
53 gal 200.7 L
Fuel Tank - Standard
413 gal 1563.4 L
Transmission
45 gal 170.4 L
Differential - Final Drives - Front
98 gal 371 L
Differential - Final Drives - Rear
90 gal 340.7 L
Hydraulic System - Implement And Brakes - Tank Only
81 gal 306.7 L
Hydraulic System - Steering And Engine Cooling Fan - Tank Only
77 gal 291.5 L
Hydraulic System - Lift/Tilt
Cylinders, Double Acting - Lift, Bore And Stroke
177 mm 1760 mm (0.58 ft 5.8 ft) 177 mm 1760 mm (0.58 ft 5.8 ft)
Cylinder, Double Acting - Tilt And Tip, Bore And Stroke
267 mm 286 mm (0.88 ft 0.94 ft) 267 mm 286 mm (0.88 ft 0.94 ft)
Output At 1,850 Rpm And 6900 Kpa (1,000 Psi)
161 gal/min 161 gal/min
Relief Valve Setting - Lift (Large Pump)
3289 psi 3289 psi
Relief Valve Setting - Tilt (Small Pump)
3560 psi 3560 psi
Cab
Air Conditioning
Standard air conditioning system contains environmentally friendly R134a refrigerant Standard air conditioning system contains environmentally friendly R134a refrigerant
Rops
ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria. ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.
Fops
FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria. FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
Cab - Rops/Fops (2)
SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005 SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005
Cab - Rops/Fops (1)
Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan. Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
Sound Performance (4)
The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A). The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).
Sound Performance (3)
Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Performance (2)
The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A). The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
Sound Performance (1)
The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
Blades
Blade Capacities
25 to 45 m (33 to 58 yd) 25 to 45 m (33 to 58 yd)
Model 854k (Tier 2)
Serial Number Prefix
RM6 RM6
Model 854k (Tier 4)
Serial Number Prefix
KK6 KK6
