Engine
Power Measured @
2600 rpm 2600 rpm
Iso 9249 Rating
71 hp 53 kw
Eec 80/1269 Rating
71 hp 53 kw
Sae J1349 Rating
71 hp 53 kw
Operational
Operating Weight
10912 lb 4960 kg
Fuel Capacity
19.6 gal 74 L
Hydraulic System Fluid Capacity
17.5 gal 66 L
Engine Oil Fluid Capacity
2.6 gal 10 L
Cooling System Fluid Capacity
5.5 gal 21 L
Transmission Fluid Capacity
2.6 gal 10 L
Static Tipping Weight
7546 lb 3430 kg
Operating Voltage
12 V 12 V
Alternator Supplied Amperage
90 amps 90 amps
Rear Axle Oscillation
22 degrees 22 degrees
Tire Size
12.5x18 12.5x18
Transmission
Transmission Type
Hydrostatic Hydrostatic
Number Of Forward Gears
2 2
Number Of Reverse Gears
2 2
Max Speed - Forward
12 mph 20 km/h
Max Speed - Reverse
12 mph 20 km/h
Weights
Operating Weight
10912 lb 4949.7 kg
Buckets
Bucket Width
6.2 ft in 1.9 m
Hydraulic System
Relief Valve Setting
3408.4 psi 23500 kPa
Pump Flow Capacity
18 gal/min 68 L/min
Raise Time
4.5 sec 4.5 sec
Dump Time
1.5 sec 1.5 sec
Lower Time
3.2 sec 3.2 sec
Hydraulic Cycle Time - Dump
1.5 1.5
Hydraulic Cycle Time - Lift
4.5 4.5
Main Relief
3400 psi 3400 psi
Hydraulic Cycle Time - Lower, Float
3.2 3.2
3rd Valve Flow
17.7 gal/min 17.7 gal/min
Pressure Flow At 2,600 Rpm And 70 Bar (1,000 Psi)
15.9 gal/min 15.9 gal/min
Operating Specifications
Breakout Force
10340 lb 4690.2 kg
Rated Bucket Capacity
1.1 yd3 0.8 m3
Dump Height At Full Lift
8 ft in 2.5 m
Articulation
40 degrees 40 degrees
Oscillation +/-
11 degrees 11 degrees
Full Turn Static Tipping Load - Bucket
6666 lb 3023.7 kg
Rack Back - Transport Position
53 degrees 53 degrees
Rated Operating Load At Full Turn - Bucket
3333 lb 1511.9 kg
Hydraulic Lift Capacity
9100 lb 4127.7 kg
Straight Tipping Load - Bucket
7546 lb 3422.9 kg
Reach - Without Teeth
2.8 ft in 0.9 m
Rated Operating Load At Full Turn - Forks
4433 lb 2010.8 kg
Full Turn Static Tipping Load - Forks
5500 lb 2494.8 kg
Service Refill Capacities
Cooling System
5.5 gal 20.9 L
Fuel Tank
19.6 gal 74.2 L
Hydraulic System
17.5 gal 66.3 L
Cab
Rops
meets the following criteria: SAE J1040 MAY94, ISO 3471-1:1986 meets the following criteria: SAE J1040 MAY94, ISO 3471-1:1986
Fops
meets the following criteria: SAE J231 JAN81, ISO 3449:1992 meets the following criteria: SAE J231 JAN81, ISO 3449:1992
Sound
Sound level is below 75 dB(A) Sound level is below 75 dB(A)
Maximum Material Densities
General Purpose Bucket - 0.6 M3 (0.8 Yd3)
3000 lb/yd 3000 lb/yd
Multi Purpose Bucket - 0.6 M3 (0.8 Yd3)
3000 lb/yd 3000 lb/yd
Light Material - Bucket 1.0 M3 (1.3 Yd3)
1950 lb/yd 1950 lb/yd
Side Dump Bucket
3000 lb/yd 3000 lb/yd
High Dump Bucket - 0.7 M3 (0.8 Yd3)
3200 lb/yd 3200 lb/yd
Stone Sieve Bucket - 0.6 M3 (0.8 Yd3)
3300 lb/yd 3300 lb/yd
Engine Dimensions
Power Train, Axles And Brakes
Transmission Type
Closed-loop, two-speed hydrostatic single-path transmission. Closed-loop, two-speed hydrostatic single-path transmission.
Maximum Travel Speeds - With 12.5-18 Tires, Forward And Reverse, Low
4 mph 6.5 km/h
Maximum Travel Speeds - Forward And Reverse, High
12 mph 19.4 km/h
Axle And Final Drives
fixed front axle with limited slip differential and planetary ge fixed front axle with limited slip differential and planetary ge
Service And Parking Brake
Are combined in a single, dry-disc driveline brake Are combined in a single, dry-disc driveline brake
Brake Standards
Brake meets ISO 3450:1996 Brake meets ISO 3450:1996