Engine
Number Of Cylinders
12 12
Engine Model
C32 ACERT C32 ACERT
Net Power
801 hp 597.4 kw
Gross Power
904 hp 674.2 kw
Power Measured @
1750 rpm 1750 rpm
Displacement
8.5 cu in 0.2 L
Emissions
U.S. EPA Tier 4 Final U.S. EPA Tier 4 Final
Gross Power - Sae J1995
904 hp 674.2 kw
Engine Model
Cat C32 with ACERT Technology Cat C32 with ACERT Technology
Gross Power***
900 hp 671.2 kw
Net Power***
814 hp 607 kw
Emissions (U.S. Epa Tier 4 Final): Gross Power - Sae J1995
900 hp 671.2 kw
Emissions (Tier 2 Equivalent): Net Power - Sae J1349
814 hp 607 kw
Emissions (U.S. Epa Tier 4 Final): Net Power - Sae J1995
814 hp 607 kw
Emissions (U.S. Epa Tier 4 Final): Peak Torque At 1,200 Rpm - Sae J1995
4765 rpm 4765 rpm
Emissions (Tier 2 Equivalent): Gross Power - Sae J1995
907 hp 676.4 kw
Emissions (Tier 2 Equivalent): Gross Power - Iso 14396
884 hp 659.2 kw
Emissions (Tier 2 Equivalent): Rated Speed
1750 rpm 1750 rpm
Emissions (Tier 2 Equivalent): Net Power - Sae J1995
814 hp 607 kw
Emissions (Tier 2 Equivalent): Peak Torque At 1,200 Rpm - Sae J1995
4796 rpm 4796 rpm
Note (Tier 4 Final) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions. These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 4 Final) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed. Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Note (Tier 2 Equivalent) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions. These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 2 Equivalent) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed. Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Emissions (U.S. Epa Tier 4 Final): Net Power - Sae J1349
814 hp 607 kw
Emissions (U.S. Epa Tier 4 Final): Gross Power - Iso 14396
884 hp 659.2 kw
Emissions (U.S. Epa Tier 4 Final): Rated Speed
1750 rpm 1750 rpm
Operational
Operating Weight
214948 lb 97498.8 kg
Fuel Capacity
413 gal 1563.4 L
Engine Oil Fluid Capacity
32 gal 120 L
Cooling System Fluid Capacity
77 gal 291.5 L
Transmission Fluid Capacity
45 gal 120 L
Front Axle/Diff Fluid Capacity
95 gal 359.7 L
Rear Axle/Diff Fluid Capacity
91 gal 344.5 L
Static Tipping Weight
113449.9 lb 51460 kg
Operating Voltage
24 V 24 V
Alternator Supplied Amperage
150 amps 150 amps
Tire Size
45/65 45 45/65 45
Transmission
Transmission Type
Cat Planetary Power Shift Cat Planetary Power Shift
Transmission Type
Planetary, powershift Planetary, powershift
Number Of Forward Gears
3 3
Number Of Reverse Gears
3 3
Max Speed - Forward
12.8 mph 20.6 km/h
Max Speed - Reverse
13.9 mph 22.4 km/h
Forward - 1
4.3 mph 7 km/h
Forward - 2
7.4 mph 12 km/h
Forward - 3
12.6 mph 20.3 km/h
Reverse - 1
4.7 mph 7.6 km/h
Reverse - 2
8.1 mph 13.1 km/h
Direct Drive - Forward 3
14.2 mph 22.9 km/h
Direct Drive - Reverse 3
15.4 mph 24.8 km/h
Direct Drive - Forward 2
8 mph 12.9 km/h
Direct Drive - Reverse 2
8.8 mph 14.2 km/h
Converter Drive - Forward 3
12.8 mph 20.6 km/h
Converter Drive - Reverse 3
13.9 mph 22.4 km/h
Direct Drive - Forward 1
Lock-up Disabled Lock-up Disabled
Converter Drive - Forward 1
4.4 mph 7.1 km/h
Converter Drive - Forward 2
7.6 mph 12.3 km/h
Direct Drive - Reverse 1
4.9 mph 7.9 km/h
Converter Drive - Reverse 1
4.6 mph 7.5 km/h
Converter Drive - Reverse 2
8.1 mph 13.1 km/h
Reverse - 3
13.8 mph 22.3 km/h
Tires
Tires
Choose from a variety of tires to match your application. Choose from a variety of tires to match your application.
Weights
Operating Weight - Standard Lift*
220089 lb 99830.7 kg
Operating Weight - High Lift**
221847 lb 100628.2 kg
Operating Weight - Standard Lift
214948 lb 97498.8 kg
Operating Weight - High Lift
226249 lb 102624.9 kg
Buckets
Bucket Capacities
10.7-12.3 m3 (14-16 yd3) 10.7-12.3 m3 (14-16 yd3)
Hydraulic System
Relief Valve Setting
4500 psi 31026.4 kPa
Axles
Rear
Oscillating Oscillating
Oscillation Angle
10 degrees , 8 degrees with Stops 10 degrees , 8 degrees with Stops
Brakes
Brakes
Meets SAE J1473, OCT90 and ISO 3450:1992 Meets SAE J1473, OCT90 and ISO 3450:1992
Operating Specifications
Bucket Capacity Range
10.7-12.3 m3 (14-16 yd3) 10.7-12.3 m3 (14-16 yd3)
Breakout Force
128895 lb 58465.8 kg
Rated Payload - High Lift
42000 lb 19050.9 kg
Rated Payload - Standard Lift
48000 lb 21772.5 kg
Operating Weight - Standard Lift*
220089 lb 99830.7 kg
Operating Weight - High Lift**
221847 lb 100628.2 kg
Operating Weight - Standard
220089 lb 99830.7 kg
Operating Weight - High Lift
226249 lb 102624.9 kg
Rated Payload - Standard (Face Material)
52910.9 lb 24000 kg
Rated Payload - High Lift (Face Material)
46297.1 lb 21000 kg
Operating Weight - Standard Lift
214948 lb 97498.8 kg
Service Refill Capacities
Cooling System
77 gal 291.5 L
Fuel Tank
413 gal 1563.4 L
Fuel Tank - Standard
413 gal 1563.4 L
Engine Crankcase
32 gal 121.2 L
Transmission
45 gal 170.4 L
Differential - Final Drives - Front
95 gal 359.7 L
Differential - Final Drives - Rear
91 gal 344.5 L
Cooling Systems
77 gal 291.5 L
Hydraulic Tank - Implement
86 gal 325.6 L
Hydraulic Tank - Steering/Brake
42 gal 159 L
Windshield Washer Fluid
4.9 gal 18.6 L
Hydraulic System - Implement
86 gal 325.6 L
Hydraulic System - Steering
42 gal 159 L
Ac Refrigerant
6 lb 2.8 kg
Hydraulic Cycle Times
Lower Float Down
3.7 s 3.7 s
Total Hydraulic Cycle Time
14.9 s 14.9 s
Lower Float Down - Empty
3.7 s 3.7 s
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive Flow Control Positive Flow Control
Lift/Tilt System - Pump
Variable Displacement Piston Variable Displacement Piston
Relief Valve Setting - Lift/Tilt
4500 psi 4500 psi
Tilt Cylinder - Stroke
80.9 in 2054.9 mm
Lift Cylinder - Bore
11 in 279.4 mm
Lift Cylinder - Stroke
45.2 in 1148.1 mm
Tilt Cylinder - Bore
10.5 in 266.7 mm
Maximum Flow At 1,850 Rpm
254 gal/min 254 gal/min
Hydraulic System - Steering
Steering System - Circuit
Pilot, Load Sensing Pilot, Load Sensing
Steering System - Pump
Piston, Variable Displacement Piston, Variable Displacement
Steering Cut Off Pressure
4500 psi 4500 psi
Steering Cycle Times - Low Idle
6.4 s 6.4 s
Steering Cycle Times - High Idle
4.4 s 4.4 s
Maximum Flow At 1,350 Rpm
95 gal/min 95 gal/min
Cab
Cab - Rops/Fops
Meets SAE and ISO standards. Meets SAE and ISO standards.
Rops/Fops
Meets SAE and ISO standards Meets SAE and ISO standards
Loader Hydraulic System
Relief Valve Setting
4500 psi 4500 psi
Relief Valve Setting - Low Idle
4500 psi 4500 psi
Lift Cylinder, Double Acting - Bore
11 in 279.4 mm
Tilt Cylinder, Double Acting - Bore
10.5 in 266.7 mm
Lift Cylinder, Double Acting - Stroke
45.2 in 1148.1 mm
Tilt Cylinder, Double Acting - Stroke
80.9 in 2054.9 mm
Model
Serial Number Prefix
880 880
Operating Specifications - High Lift*
Breakout Force
127813 lb 57975.1 kg
Static Tipping Load - At 35 Degrees Articulation
114760 lb 52054.3 kg
Operating Specifications - Standard Lift*
Breakout Force
123439 lb 55991 kg
Static Tipping Load - At 35 Degrees Articulation
122010 lb 55342.9 kg
Sound Performance
Performance
Performance Performance
Operator Sound Pressure Level
The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing Protection
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level - Standard Machine Configuration
The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Machine Sound Power Level - Sound Suppressed Machine Configuration
The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Dimensions - High Lift - Approximate
Ground To Top Of Rops
18.7 ft in 5.7 m
Ground To Top Of Exhaust Stacks
17.3 ft in 5.3 m
Ground To Top Of Hood
13.3 ft in 4.1 m
Ground To Bumper Clearance
3.9 ft in 1.2 m
Rear Axle - Centerline To Bumper
13.8 ft in 4.2 m
Wheel Base
19.4 ft in 5.9 m
Maximum Overall Length
52.9 ft in 16.1 m
Ground To Lower Hitch Clearance
2.3 ft in 0.7 m
Ground To Center Of Axles
4.5 ft in 1.4 m
Rack Back Angle - Ground Level
42.8 degrees 42.8 degrees
Rack Back Angle - Carry
52.5 degrees 52.5 degrees
B-Pin Height - Maximum Lift
24.6 ft in 7.5 m
Maximum Overall Height - Bucket Raised
33.1 ft in 10.1 m
Dump Angle At Maximum Lift
50 degrees 50 degrees
Reach - Maximum Lift
6.9 ft in 2.1 m
Tread Width
10.9 ft in 3.4 m
Clearance At 45 Degrees Dump (Tooth Tip)
15.1 ft in 4.6 m
Rack Back Angle - Maximum Lift
65 degrees 65 degrees
Dimensions - Standard Lift - Approximate
Ground To Top Of Rops
18.7 ft in 5.7 m
Ground To Top Of Exhaust Stacks
17.3 ft in 5.3 m
Ground To Top Of Hood
13.3 ft in 4.1 m
Ground To Bumper Clearance
3.9 ft in 1.2 m
Rear Axle - Centerline To Bumper
13.8 ft in 4.2 m
Wheel Base
19.4 ft in 5.9 m
Maximum Overall Length
52 ft in 15.9 m
Ground To Lower Hitch Clearance
2.3 ft in 0.7 m
Ground To Center Of Axles
4.5 ft in 1.4 m
Rack Back Angle - Ground Level
43.4 degrees 43.4 degrees
Rack Back Angle - Carry
52.7 degrees 52.7 degrees
B-Pin Height - Maximum Lift
22.8 ft in 7 m
Maximum Overall Height - Bucket Raised
30.5 ft in 9.3 m
Dump Angle At Maximum Lift
50 degrees 50 degrees
Reach - Maximum Lift
7 ft in 2.2 m
Tread Width
10.9 ft in 3.4 m
Clearance At 50 Degrees Dump (Tooth Tip)
14.7 ft in 4.5 m
Rack Back Angle - Maximum Lift
65 degrees 65 degrees
Operating Specifications - High Lift
Static Tipping Load - At 35 Degrees Articulation
96853 lb 43931.8 kg
Breakout Force
129777 lb 58865.9 kg
Operating Specifications - Standard Lift
Static Tipping Load - At 35 Degrees Articulation
113159 lb 51328.1 kg
Standard Lift Breakout Force
128895 lb 58465.8 kg
High Lift Breakout Force
127775 lb 57957.8 kg
Breakout Force
128895 lb 58465.8 kg