Engine
Number Of Cylinders
12 12
Engine Model
C32 ACERT C32 ACERT
Net Power
973 hp 725.6 kw
Gross Power
1050 hp 783 kw
Displacement
1958.9 cu in 32.1 L
Operational
Operating Weight
294670 lb 133637 kg
Fuel Capacity
545 gal 2063 L
Hydraulic System Fluid Capacity
49 gal 185 L
Engine Oil Fluid Capacity
32 gal 120 L
Cooling System Fluid Capacity
84 gal 318 L
Transmission Fluid Capacity
45 gal 120 L
Front Axle/Diff Fluid Capacity
130 gal 493 L
Rear Axle/Diff Fluid Capacity
128 gal 485 L
Static Tipping Weight
186378 lb 84525 kg
Turning Radius
36.1 ft in 11018 mm
Operating Voltage
24 V 24 V
Alternator Supplied Amperage
150 amps 150 amps
Tire Size
50 / 65R51 50 / 65R51
Transmission
Transmission Type
Cat Planetary Power Shift Cat Planetary Power Shift
Transmission Type
Powershift Powershift
Number Of Forward Gears
3 3
Number Of Reverse Gears
3 3
Max Speed - Forward
13.6 mph 21.9 km/h
Max Speed - Reverse
15 mph 24.2 km/h
Forward - 1
4.2 mph 6.8 km/h
Forward - 2
7.4 mph 12 km/h
Forward - 3
12.7 mph 20.5 km/h
Note
50/65-51 BFOR (311-1938), calculated speeds. 50/65-51 BFOR (311-1938), calculated speeds.
Reverse - 1
4.7 mph 7.6 km/h
Reverse - 2
8.1 mph 13.1 km/h
Direct Drive - Forward 3
14.1 mph 22.7 km/h
Direct Drive - Reverse 3
15.6 mph 25.2 km/h
Direct Drive - Forward 2
8 mph 12.9 km/h
Direct Drive - Reverse 2
8.8 mph 14.2 km/h
Direct Drive - Forward 1
Lock-up disabled Lock-up disabled
Direct Drive - Reverse 1
4.9 mph 7.9 km/h
Reverse - 3
13.9 mph 22.4 km/h
Buckets
Bucket Capacities
12.2-23.7 m3 (16.0-31.0 yd3) 12.2-23.7 m3 (16.0-31.0 yd3)
Hydraulic System
Relief Valve Setting
4278 psi 29500 kPa
Raise Time
9.4 sec 9.4 sec
Dump Time
2.1 sec 2.1 sec
Lower Time
6.7 sec 6.7 sec
Axles
Hydraulic System
Pump Type
3x fully variable E/H displacement control 3x fully variable E/H displacement control
Axles
Oscillation Angle
10 degrees 10 degrees
Operating Specifications
Note
* High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912). * High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912).
Cat Truck Match - High Lift
777, 785 777, 785
Articulation Angle
43 degrees 43 degrees
Rated Payload - High Lift
60627.1 lb 27500 kg
Rated Payload - Standard Lift
66138.6 lb 30000 kg
Operating Weight - Tier 2 Equivalent*
294687 lb 133667.8 kg
Operating Weight - Tier 4 Final*
294687 lb 133667.8 kg
Bucket Range
12.2-23.7 m3 (16.0-31.0 yd3) 12.2-23.7 m3 (16.0-31.0 yd3)
Cat Truck Match - Standard Lift
777 777
Operating Weight*
294687 lb 133667.8 kg
Service Refill Capacities
Cooling System
80.2 gal 303.6 L
Fuel Tank
573.3 gal 2170.2 L
Transmission
52 gal 196.9 L
Differential - Final Drives - Front
127.3 gal 481.9 L
Differential - Final Drives - Rear
127.3 gal 481.9 L
Hydraulic System Factory Fill
230 gal 870.7 L
Hydraulic System - Tank Only
146 gal 552.7 L
Note
High Lift configuration. High Lift configuration.
Sound
Note (1)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.
Note (2)
The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operator Sound Pressure - Ansi/Sae J1166 Feb08
72 dB(A) 72 dB(A)
Dynamic Operator Sound Pressure Level (Iso 6396:2008)
70 dB(A) 70 dB(A)
Note (3)
The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hydraulic Cycle Times
Lower Float Down
3.1 s 3.1 s
Total Hydraulic Cycle Time
17.2 s 17.2 s
Note
High Lift configuration, calculated speeds. High Lift configuration, calculated speeds.
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive Flow Control Positive Flow Control
Lift/Tilt System - Pump
Variable Piston Variable Piston
Relief Valve Setting - Lift/Tilt
4200 psi 4200 psi
Tilt Cylinder - Stroke
40.9 in 1038.9 mm
Lift Cylinder - Bore
10.5 in 266.7 mm
Lift Cylinder - Stroke
66.2 in 1681.5 mm
Tilt Cylinder - Bore
9.3 in 236.3 mm
Cylinders - Lift/Tilt
Double-acting Double-acting
Maximum Flow At 1,650 Rpm
311 gal/min 311 gal/min
Note
High Lift configuration. High Lift configuration.
Hydraulic System - Steering
Steering System - Circuit
Closed Closed
Steering System - Pump
Piston, variable displacement Piston, variable displacement
Total Steering Angle
86 degrees 86 degrees
Relief Valve Setting - Steering
5000 psi 5000 psi
Maximum Flow At 1,985 Rpm (6900 Kpa/1,000 Psi)
133 gal/min 133 gal/min
Engine - Tier 2 Equivalent
Engine Model
Cat C32 with ACERT Technology Cat C32 with ACERT Technology
Emissions
U.S. EPA Tier 2 Equivalent U.S. EPA Tier 2 Equivalent
Rated Speed
1800 rpm 1800 rpm
Gross Power - Sae J1995
1041 hp 776.3 kw
Net Power - Iso 14396
1024 hp 763.6 kw
Net Power - Eec 80/1269
973 hp 725.6 kw
Net Power - Iso 9249
973 hp 725.6 kw
Net Power - Sae J1349
964 hp 718.9 kw
Displacement
1959 cu in 32.2 L
Peak Torque - 1,250 Rpm
4034 lb ft 5469.4 Nm
Note
Standard ambient cooling. Standard ambient cooling.
Engine - Tier 4 Final
Engine Model
Cat C32 with ACERT Technology Cat C32 with ACERT Technology
Emissions
U.S. EPA Tier 4 Final U.S. EPA Tier 4 Final
Rated Speed
1800 rpm 1800 rpm
Gross Power - Sae J1995
1039 hp 774.8 kw
Net Power - Iso 14396
1024 hp 763.6 kw
Net Power - Eec 80/1269
973 hp 725.6 kw
Net Power - Iso 9249
973 hp 725.6 kw
Net Power - Sae J1349
964 hp 718.9 kw
Displacement
1959 cu in 32.2 L
Peak Torque - 1,250 Rpm
4034 lb ft 5469.4 Nm
Note
Standard ambient cooling. Standard ambient cooling.
