Ripper
Beam Cross Section
216 mm 254 mm (8.5 in 10.0 in) 216 mm 254 mm (8.5 in 10.0 in)
Maximum Penetration - Xl
20.2 in 513.1 mm
Maximum Penetration - Lgp
15.6 in 396.3 mm
Ripper Type
Fixed Parallelogram Fixed Parallelogram
Pocket Spacing
3.3 ft in 1.1 m
Shank Gauge
6.6 ft in 2.1 m
Shank Section
73 mm 176 mm (2.9 in 6.9 in) 73 mm 176 mm (2.9 in 6.9 in)
Maximum Clearance Raised - Shank Tip
24.5 in 622.3 mm
Maximum Penetration Force - Xl
11600 lb ft 15727.5 Nm
Maximum Pry-Out Force - Xl
47480 lb ft 64374.3 Nm
Maximum Penetration Force - Lgp
9667 lb ft 13106.7 Nm
Maximum Pry-Out Force - Lgp
38217 lb ft 51815.3 Nm
Each Additional Shank
172 lb 78.1 kg
Weight - With Three Shanks
3444 lb 1562.2 kg
Overall Beam Width
86.7 in 2202.2 mm
Engine
Engine Model
3126 DITAAC 3126 DITAAC
Net Power
145 hp 108.2 kw
Displacement
433 cu in 7.1 L
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Engine Model
Cat C7.1 ACERT Cat C7.1 ACERT
Flywheel Power
166 hp 123.8 kw
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed. Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed.
Note (2)
No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs. No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs.
Note (3)
All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (4)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power - 1,800 Rpm - Iso 9249/Sae J1349 (Din)
168 hp 125.3 kw
Net Power - 1,800 Rpm - Iso 9249/Sae J1349
166 hp 123.8 kw
Engine Power - Maximum - At 2,200 Rpm - Sae J1995
182 hp 135.8 kw
Engine Power - Maximum - At 2,200 Rpm - Iso 14396
178 hp 132.8 kw
Engine Power - Maximum - At 2,200 Rpm - Iso 14396 (Din)
180 hp 134.3 kw
Operational
Operating Weight
34361 lb 15585.9 kg
Fuel Capacity
79 gal 299 L
Cooling System Fluid Capacity
10.8 gal 40.7 L
Hydraulic Fluid Capacity
7.8 gal 29.5 L
Final Drives Fluid Capacity
1.9 gal 7 L
Transmission
Number Of Forward Gears
3 3
Number Of Reverse Gears
3 3
Max Speed - Forward
6.3 mph 10.2 km/h
Max Speed - Reverse
7.4 mph 12 km/h
1.0 Forward
2.1 mph 3.4 km/h
2.0 Forward
3.6 mph 5.8 km/h
3.0 Forward
6.1 mph 9.9 km/h
1.0 Reverse
2.5 mph 4.1 km/h
2.0 Reverse
4.4 mph 7.1 km/h
3.0 Reverse
7.6 mph 12.3 km/h
1.5 Forward
2.7 mph 4.4 km/h
2.5 Forward
4.7 mph 7.6 km/h
1.5 Reverse
3.4 mph 5.5 km/h
2.5 Reverse
5.9 mph 9.5 km/h
0.5 Forward
1.6 mph 2.6 km/h
0.7 Forward
1.7 mph 2.8 km/h
1.7 Forward
3 mph 4.9 km/h
2.7 Forward
5.2 mph 8.4 km/h
0.5 Reverse
1.9 mph 3.1 km/h
0.7 Reverse
2.1 mph 3.4 km/h
1.7 Reverse
3.7 mph 6 km/h
2.7 Reverse
6.5 mph 10.5 km/h
0.5 Forward (Eu)
1.5 mph 2.5 km/h
0.7 Forward (Eu)
1.6 mph 2.6 km/h
0.5 Reverse (Eu)
1.8 mph 2.9 km/h
0.7 Reverse (Eu)
1.9 mph 3.1 km/h
1.0 Reverse (Eu)
2.2 mph 3.6 km/h
Maximum Drawbar Pull - 1.0 Forward
71939 lb ft 97536.2 Nm
Maximum Drawbar Pull - 2.0 Forward
44512 lb ft 60350.2 Nm
Maximum Drawbar Pull - 3.0 Forward
25403 lb ft 34441.9 Nm
1.0 Forward (Eu)
1.9 mph 3.1 km/h
Weights
Operating Weight
36943 lb 16757.1 kg
Note (1)
Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator. Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator.
Note (2)
Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat. Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat.
Operating Weight - Lgp
40446 lb 18346 kg
Shipping Weight - Lgp
39339 lb 17843.9 kg
Operating Weight - Xl Waste Handler
40818 lb 18514.8 kg
Operating Weight - Lgp Waste Handler
44749 lb 20297.9 kg
Shipping Weight - Xl Waste Handler
40029 lb 18156.9 kg
Shipping Weight - Lgp Waste Handler
43642 lb 19795.7 kg
Shipping Weight - Xl
36153 lb 16398.8 kg
Operating Weight - Xl
36943 lb 16757.1 kg
Xl Vpat Blade
2341 lb 1061.9 kg
Lgp Vpat - Blade
2720 lb 1233.8 kg
Xl Vpat Foldable
2762 lb 1252.9 kg
Lgp Vpat - Foldable
3287 lb 1491 kg
Xl Su - Blade
5732 lb 2600 kg
Xl Vpat Landfill
2912 lb 1320.9 kg
Multi-Shank Ripper - With 3 Shanks
2959 lb 1342.2 kg
Lgp Vpat - Landfill
3166 lb 1436.1 kg
Operating Weight - Xl Fine Grading
38162 lb 17310 kg
Shipping Weight - Xl Fine Grading
37373 lb 16952.2 kg
Standard Blade
Cutting Depth
21.2 in 538 mm
Service Refill Capacities
Cooling System
10.6 gal 40.2 L
Fuel Tank
73.2 gal 277.1 L
Final Drive - Each
1.8 gal 6.9 L
Hydraulic Tank
7.8 gal 29.6 L
Engine Crankcase
4.5 gal 17.1 L
Power Train
42.3 gal 160.2 L
Roller Frames Xl/Lgp - Each
20/17.5 L (4.3/4.6 gal) 20/17.5 L (4.3/4.6 gal)
Standards
Brakes
Brakes meet the standard ISO 10265:2008. Brakes meet the standard ISO 10265:2008.
Rops
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008. ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Fops
FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II. FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Hydraulic Controls - Pump
Lift Cylinder Flow
33.5 gal/min 33.5 gal/min
Ripper Cylinder Flow
33.5 gal/min 33.5 gal/min
Pump Output - Steering
36.2 gal/min 36.2 gal/min
Pump Output - Implement
33.5 gal/min 33.5 gal/min
Tilt Cylinder Flow
23.8 gal/min 23.8 gal/min
Angle Cylinder Flow - Vpat
33.5 gal/min 33.5 gal/min
Hydraulic Controls - Pressures
Maximum Implement Operating Pressure
3640 psi 3640 psi
Maximum Steering Operating Pressure
6556 psi 6556 psi
Sound And Vibration - Cab
Sound Level Information (1)
The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when ANSI/SAE J1166 FEB2008 is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when ANSI/SAE J1166 FEB2008 is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Sound Level Information (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when the doors and windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when the doors and windows are open for extended periods or in a noisy environment.
Sound Level Information (3)
The average exterior sound pressure level is 85.5 dB(A) when the SAE J88 FEB2006 Constant Speed Moving Test procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and the machine moving forward in an intermediate gear ratio. The average exterior sound pressure level is 85.5 dB(A) when the SAE J88 FEB2006 Constant Speed Moving Test procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and the machine moving forward in an intermediate gear ratio.
Specification Name Too Long
If equipped, the certification label 110 dB(A) is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level (LWA) at the time of manufacture for the conditions that are specified in 2000/14/EC. Your machine may have a different value. If equipped, the certification label 110 dB(A) is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level (LWA) at the time of manufacture for the conditions that are specified in 2000/14/EC. Your machine may have a different value.
Sustainability - Sound And Vibration Levels
Sound Levels - Average Exterior Sound Pressure Level - Sae J88:2006
85.5 dB(A) 85.5 dB(A)
Sound Levels - Dynamic Operator Sound Pressure Level (Lpa) - Iso 6396:2008
76 dB(A) 76 dB(A)
Sound Levels - Maximum Sound Power Level - 2000/14/Ec
110 dB(A) 110 dB(A)
Vibration Levels - Maximum Hand/Arm* - Iso 5349:2001
2.5 m/s2 (8.2 ft/s2) 2.5 m/s2 (8.2 ft/s2)
Vibration Levels - Maximum Whole Body* - Iso/Tr25398:2006
0.5 m/s2 (1.6 ft/s2) 0.5 m/s2 (1.6 ft/s2)
Vibration Levels - Seat Transmissibility Factor - Iso 7096:2000 - Spectral Class Em6
Less Than 0.7 Less Than 0.7
Note
*Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details. *Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details.
Winch
Flange Diameter
19.8 in 503 mm
Oil Capacity
19.6 gal 74.1 L
Winch And Bracket Length
45.1 in 1145.6 mm
Drum Capacity - 22 Mm (0.88 In)
288.8 ft in 88.1 m
Winch Drive
Mechanical Mechanical
Control
Electric Electric
Overall Width
38.4 in 975.4 mm
Drum Diameter
10 in 254 mm
Drum Width
12.4 in 315 mm
Rope Diameter - Recommended
0.9 in 22.3 mm
Cable Ferrule Size - O.D. Length
54 mm 67 mm (2.13 in 2.63 in) 54 mm 67 mm (2.13 in 2.63 in)
Maximum Bare Drum - Line Speed
141 ft/min 141 ft/min
Maximum Full Drum - Line Speed
217 ft/min 217 ft/min
Maximum Bare Drum - Line Pull*
69200 lb 31388.6 kg
Maximum Full Drum - Line Pull*
44410 lb 20144.1 kg
Winch Case - Width
38.4 in 975.4 mm
Weight*
2814 lb 1276.5 kg
Note (1)
*Weight: Includes pump, operator controls, oil, mounting brackets and spacers. *Weight: Includes pump, operator controls, oil, mounting brackets and spacers.
Note (2)
Slow and standard speed winches are available. Slow and standard speed winches are available.