This is a Breadcrum

Caterpillar D8T WH Crawler Tractor Dimensions & Specs

Picture of a Caterpillar D8T WH Crawler Tractor
Picture of a Caterpillar D8T WH Crawler Tractor
Picture of a Caterpillar D8T WH Crawler Tractor

Transport a Caterpillar D8T WH Crawler Tractor

Transporting a Caterpillar D8T WH Crawler Tractor is a process that involves multiple steps, each requiring careful attention and expertise. First, the Caterpillar D8T WH Crawler Tractor is prepared for transport, which may involve disassembling larger components and securing fragile parts.During the loading phase, special equipment like forklifts or cranes may be used

Read more

Dimensions

Blades
Su - Blade Width
12.9 ft in
Blade Type
SU, U
Lgp Su-Blade Capacity With Trash Rack
27.6 yd3
U-Blade Capacity With Trash Rack
32.4 yd3
Su-Blade Capacity - With Trash Rack
26.1 yd3
U-Blade Width
14 ft in
Dimensions
ALength W/ Blade
19.99 ft in
BWidth Over Tracks
8.66 ft in
CHeight To Top Of Cab
11.35 ft in
DLength Of Track On Ground
10.53 ft in
EGround Clearance
2.03 ft in
FLength W/O Blade
15.22 ft in
Overall Length - Basic Tractor
15.22 ft in
Width - Over Trunnions
10 ft in
Width - Without Blade
120 in
Width - With Blade
155 in
Overall Length - With Blade
240 in
Width - Without Trunnions - Standard Shoe
8.66 ft in
Height - Rops/Canopy
11.35 ft in
Height - Stripped Top
8.76 ft in
Dimensions - Lgp
GTrack Gauge
92 in
Machine Height - Grouser Tip - Exhaust Stack
129.7 in
Length - Basic Tractor - With Striker Bars With Two Counterweights*
206.4 in
Width - Tractor - Over Trunnions
130.4 in
Height - Top Of Roof-Mounted Precleaner
145.2 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Height - Grouser
3.1 in
Machine Height - Grouser Tip - Length Of Track On Ground
126.2 in
Without Trunnions - Standard Shoe Width
130 in
Machine Height - Grouser Tip - Erops (Top Of Railing)
140.4 in
Length - Basic Tractor - Tag Link Trunnion To Tip - Rear Grouser*
183 in
Machine Height - Grouser Tip - Ground Clearance
24.1 in
Dimensions - Non-Suspended
GTrack Gauge
82 in
Width - Tractor - Over Trunnions
120.4 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Height - Grouser
3.1 in
Height - Top Of Roof-Mounted Precleaner
145.2 in
Length - Basic Tractor - Tag Link Trunnion To Tip - Rear Grouser*
183 in
Length - Basic Tractor - With Striker Bars With Two Counterweights*
206.4 in
Machine Height - Grouser Tip - Erops (Top Of Railing)
140.7 in
Machine Height - Grouser Tip - Exhaust Stack
136.31 in
Machine Height - Grouser Tip - Ground Clearance
23.8 in
Machine Height - Grouser Tip - Length Of Track On Ground
128.31 in
Without Trunnions - Standard Shoe Width
106 in
Dimensions - Standard
GTrack Gauge
82 in
Length - Basic Tractor - With Striker Bars With Two Counterweights*
206.4 in
Length - Basic Tractor - Tag Link Trunnion To Tip - Rear Grouser*
183 in
Height - Top Of Roof-Mounted Precleaner
145.2 in
Height - Grouser
3.1 in
Machine Height - Grouser Tip - Ground Clearance
24.1 in
Without Trunnions - Standard Shoe Width
106 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Machine Height - Grouser Tip - Length Of Track On Ground
126.2 in
Machine Height - Grouser Tip - Erops (Top Of Railing)
140.4 in
Width - Tractor - Over Trunnions
120.4 in
Machine Height - Grouser Tip - Exhaust Stack
136.7 in
Undercarriage
GTrack Gauge
6.84 ft in
HStandard Shoe Size
22 in
Length - Track On Ground
10.53 ft in
Track Gauge - Lgp
92 in
Track On Ground - Lgp
126 in
Track Rollers/Side
8
Track Rollers/Side - Lgp
8
Track Width
1.84 ft in
Number Of Track Rollers Per Side
8
Width - Shoe - Lgp
38 in
Ground Contact Area - Lgp
9610 in2
Ground Contact Area
5549 in2

Specifications

Engine
Number Of Cylinders
6
Engine Make
2236
Engine Model
C15 ACERT
Gross Power
347 hp
Net Power
310 hp
Power Measured @
2000 rpm
Displacement
928 cu in
Bore
5.4 in
Stroke
6.8 in
Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Engine Model
Cat C15 ACERT
Flywheel Power
335 hp
Note (1)
All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (3)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
Rpm
1850 rpm
Net Power - 1,900 Rpm - Iso 9249/Sae J1349
312 hp
Net Power - 1,900 Rpm - Iso 9249/Sae J1349 (Din)
317 hp
Net Power - Maximum - Iso 9249/Sae J1349 At 1,700 Rpm
335 hp
Net Power - Maximum - Iso 9249/Sae J1349 Din At 1,700 Rpm
343 hp
Operational
Operating Weight
85150 lb
Fuel Capacity
170 gal
Operating Voltage
24 V
Alternator Supplied Amperage
100 amps
Transmission
1 Forward
2.1 mph
2 Forward
3.8 mph
3 Forward
6.6 mph
1 Reverse
2.8 mph
2 Reverse
5 mph
3 Reverse
8.8 mph
1.0 Forward
2.1 mph
2.0 Forward
3.8 mph
3.0 Forward
6.6 mph
1.0 Reverse
2.8 mph
2.0 Reverse
5 mph
3.0 Reverse
8.8 mph
Weights
Operating Weight
86710 lb
Standard Blade
Width
12.9 ft in
Capacity
26.1 yd3
Service Refill Capacities
Fuel Tank
170 gal
Standards
Rops
SAE J1040 MAY94, ISO 3471:1994
Fops
SAE J/ISO 3349 APR98 Level II, ISO 3449:1992 Level II
Rippers
Each Additional Shank
732 lb
Operating Weights
Lgp Waste Handler
91600 lb
Standard Waste Handler
86710 lb
Blades - Capacity (Sae J1265)
8 U Landfill
27.7 yd3
8 Su Landfill
25.6 yd3
8 Su Lgp Landfill
28.9 yd3
Blades - Width - Over End Bits
8 Su Landfill
12.9 ft in
8 U Landfill
13.9 ft in
8 Su Lgp Landfill
14.9 ft in
Shipping Weight
Lgp Waste Handler
77900 lb
Standard Waste Handler
73400 lb

Need to transport this equipment?

Click below to get an estimate on shipping this equipment