Bale Size
Bale Width
3.9 ft in 1182 mm
Engine
Displacement
1106 cu in 18.2 L
Bale Size
Bale Diameter - Min
2.5 ft in 762 mm
Bale Diameter - Max
5.2 ft in 1575 mm
Bale Weight - Max
1250 lb 567 kg
Engine
Emissions
The 745 meets Tier 4 Final/Stage IV emission standards. The 745 meets Tier 4 Final/Stage IV emission standards.
Net Power - Sae J1349
496 hp 369.9 kw
Gross Power - Sae J1995
511 hp 381.1 kw
Engine Model
Cat C18 ACERT Cat C18 ACERT
Net Power - Iso 14396
504 hp 375.9 kw
Note (1)
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3)
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
No Engine De-Rating Required Below
10000 ft in 3048 m
Peak Engine Torque Gross (Sae J1995)
1931 lb ft 2618.1 Nm
Peak Engine Torque Speed
1200 rpm 1200 rpm
Peak Engine Torque Net (Sae J1349)
1887 lb ft 2558.5 Nm
Engine Model - U.S. Epa Tier 4 Final, Eu Stage Iv, Japan 2014, Korea Tier 4 Final
Cat C18 ACERT Cat C18 ACERT
Bale Chamber
Number Of Belts
6 laced 6 laced
Transmission
Forward - 1
3.8 mph 6.2 km/h
Forward - 2
5 mph 8.1 km/h
Forward - 3
7 mph 11.3 km/h
Forward - 4
8.8 mph 14.2 km/h
Forward - 5
11.6 mph 18.7 km/h
Forward - 6
14.2 mph 22.9 km/h
Forward - 7
19.6 mph 31.6 km/h
Reverse - 1
4 mph 6.5 km/h
Reverse - 2
9.1 mph 14.7 km/h
Steering
Lock To Lock
4.8 seconds @ 60 rpm 4.8 seconds @ 60 rpm
Transmission
Forward - 8
23.5 mph 37.9 km/h
Forward - 9
34 mph 54.8 km/h
Dump
Rated Payload
99648.9 lb 45200 kg
Wrapping System
Twine Type
Electric Electric
Service Refill Capacities
Cooling System
23.7 gal 89.8 L
Fuel Tank
145.3 gal 550.1 L
Final Drive - Each
1.3 gal 5 L
Engine Crankcase
13.7 gal 51.9 L
Brake Cooling Tank
17.7 gal 67 L
Steering/Hoist Hydraulic System
36.9 gal 139.7 L
Transmission - Otg
19.8 gal 75 L
Axles - Each
15.8 gal 59.9 L
Standards
Cab - Fops
ISO 3449 Level II 2005 ISO 3449 Level II 2005
Cab - Rops
ISO 3471 2008 ISO 3471 2008
Brakes
ISO 3450 2011 ISO 3450 2011
Steering
ISO 5010 2007 ISO 5010 2007
Operating Weights
Front Axle - Empty
43515 lb 19738.1 kg
Center Axle - Empty
15309 lb 6944.1 kg
Rear Axle - Empty
14731 lb 6681.9 kg
Total - Empty
73553 lb 33363.1 kg
Front Axle - Rated Load
13007 lb 5899.9 kg
Center Axle - Rated Load
38691 lb 17550 kg
Rear Axle - Rated Load
38691 lb 17550 kg
Total - Rated Load
90390 lb 41000.3 kg
Front Axle - Loaded
56522 lb 25638 kg
Center Axle - Loaded
54000 lb 24494 kg
Rear Axle - Loaded
53422 lb 24231.9 kg
Total - Loaded
163942 lb 74362.9 kg
Sound Levels
Interior Cab
72 dB(A) 72 dB(A)
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Turning Circle
Note
Dimensions are for machines equipped with 29.5R25 tires. Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions - Sae Turning Radius
340 in 8636 mm
Turning Dimensions - Clearance Radius
356 in 9042.4 mm
Turning Dimensions - Inside Radius
174 in 4419.6 mm
Turning Dimensions - Aisle Width
233 in 5918.2 mm
Body Capacities
Heaped (Sae 2:1)
32.7 yd3 25.1 m3
Tailgate Struck
25.5 yd3 19.5 m3
Tailgate Heaped Sae 2:1
34.7 yd3 26.6 m3
Body Hoist
Lower (Automatic)
10 s 10 s
Raise (Automatic)
13 s 13 s
Body Plate
Body Plate Type
High Strength Brinell HB450 Wear Resistant Steel High Strength Brinell HB450 Wear Resistant Steel
Optimal Loader/Truck Pass Matching
Note
An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Hydraulic Excavator: 390 - Passes
4 4
Hydraulic Excavator: 374 - Passes
5 5
Wheel Loader: 982 - Passes
4 4
Wheel Loader: 980 - Passes
4-5 4-5
Wheel Loader: 972 - Passes
4-5 4-5