Swing System
Machine Swing Speed
10.6 rpm 10.6 rpm
Engine
Engine Model
300 Series 300 Series
Net Power
70.3 hp 52.5 kw
Power Measured @
2500 rpm 2500 rpm
Torque Measured @
1300 rpm 1300 rpm
Net Max Torque
129 lb ft 175 Nm
Aspiration
naturally aspirataed naturally aspirataed
Displacement
203 cu in 3.4 L
Engine Model
Cat C3.3B Cat C3.3B
Gross Power - Iso 14396
74.3 hp 55.5 kw
Rated Net Power - 2,200 Rpm - U.S. Epa Tier 4 Final - Iso 9249/Eec 80/1269
70.3 hp 52.5 kw
Rated Net Power - 2,200 Rpm - Eu Stage V - Iso 9249/Eec 80/1269
71.5 hp 53.4 kw
Operational
Fuel Capacity
19.5 gal 73.9 L
Hydraulic System Fluid Capacity
8.5 gal 32.2 L
Cooling System Fluid Capacity
0.8 gal 2.7 L
Transmission Fluid Capacity
20.5 gal 77.7 L
Tire Size Front - 2wd / 4wd
7.50-16 7.50-16
Rear Tires Size 2wd/4wd
16.9-24 16.9-24
Transmission
Transmission Type
Collar Shift Collar Shift
Number Of Forward Gears
8 8
Number Of Reverse Gears
4 4
Weights
Operating Weight
22447 lb 10181.8 kg
Note (1)
*Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, long stick, blade and no bucket. *Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, long stick, blade and no bucket.
Note (2)
**Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket.
Minimum Operating Weight With Cab*
21166 lb 9600.8 kg
Maximum Operating Weight With Cab**
22447 lb 10181.8 kg
Blade
Hydraulic
Pump Flow Capacity
23 gal/min 87.1 L/min
Relief Valve Pressure
500 psi 3447.4 kPa
Hydraulic System
Hydraulic System Type
Load Sensing Hydraulics with Variable Displacement Piston Pump Load Sensing Hydraulics with Variable Displacement Piston Pump
Operating Pressure - Swing
3336 psi 3336 psi
Operating Pressure - Equipment
4134 psi 4134 psi
Operating Pressure - Travel
4134 psi 4134 psi
Digging Force - Bucket
17459 lb 7919.3 kg
Pump Flow At 2,400 Rpm
62 gal/min 62 gal/min
Auxiliary Circuit - Primary - Flow
35 gal/min 35 gal/min
Auxiliary Circuit - Primary - Pressure
4134 psi 4134 psi
Auxiliary Circuit - Secondary - Flow
9 gal/min 9 gal/min
Auxiliary Circuit - Secondary - Pressure
4134 psi 4134 psi
Blade
Width - Standard
97.2 in 2468.9 mm
Width - Wide
103.9 in 2639.1 mm
Hydraulic System
Digging Force - Stick
11060 lb 5016.8 kg
Service Refill Capacities
Cooling System
2.6 gal 9.9 L
Hydraulic Tank
14 gal 53 L
Hydraulic System
37 gal 140.1 L
Sound
Note
European Union Directive 2000/14/EC European Union Directive 2000/14/EC
Average Exterior Sound Pressure (Iso 6395:2008)
99 dB(A) 99 dB(A)
Operator Sound Pressure (Iso 6396:2008)
72 dB(A) 72 dB(A)
Travel System
Maximum Traction Force - High Speed
6497 lb 2947 kg
Maximum Traction Force - Low Speed
19064 lb 8647.3 kg
Travel Speed - High
3.1 mph 5 km/h
Travel Speed - Low
1.6 mph 2.6 km/h
Gradeability - Maximum
30 degrees 30 degrees
Ground Pressure - Minimum Weight
6 psi 6 psi
Ground Pressure - Maximum Weight
6 psi 6 psi
Weight Increase From Minimum Configuration
Counterweight
552 lb 250.4 kg
Steel Tracks With Pads
728 lb 330.3 kg
Certification - Cab
Roll Over Protective Structure (Rops)
ISO 12117-2:2008 ISO 12117-2:2008
Tip Over Protective Structure (Tops)
ISO 12117:1997 ISO 12117:1997
Top Guard
ISO 10262:1998 (Level II) ISO 10262:1998 (Level II)