Engine
Engine Model
PowerTech PSS 9.0L PowerTech PSS 9.0L
Displacement
1105 cu in 18.2 L
Net Power - Iso 9249
550 hp 410.2 kw
Net Power - Sae J1349
550 hp 410.2 kw
Gross Power - Sae J1995
605 hp 451.2 kw
Engine Model
Cat C18 ACERT Cat C18 ACERT
Rated Engine Speed
1700 rpm 1700 rpm
Net Torque - Sae J1349
2221 lb ft 3011.3 Nm
Engine Power - Iso 14396
598 hp 446 kw
Operational
Hydraulic System Fluid Capacity
16 gal 60.5 L
Max Operation Weight - Total
44570.9 lb 20217 kg
Fuel Capacity
110 gal 416.4 L
Tire Size
14.00 - 24 14.00 - 24
Transmission
Number Of Gears - Forward
8 8
Number Of Gears - Reverse
8 8
Max Speed - Forward
28.3 mph 45.6 km/h
Max Speed - Reverse
28.3 mph 45.6 km/h
Reverse
10.4 mile/h 10.4 mile/h
Forward - 1
8 mph 12.9 km/h
Forward - 2
10.9 mph 17.6 km/h
Forward - 3
14.8 mph 23.9 km/h
Forward - 4
19.8 mph 31.9 km/h
Forward - 5
26.9 mph 43.3 km/h
Forward - 6
36.2 mph 58.3 km/h
Forward - 7
49.2 mph 79.2 km/h
Steering
Steering Standards
ISO 5010:2007 ISO 5010:2007
Steer Angle
31 degrees 31 degrees
Turning Diameter - Front
57.7 ft in 17.6 m
Turning Circle - Clearance Diameter
66.6 ft in 20.3 m
Tires
Standard Tire
21.00R33 (E4) 21.00R33 (E4)
Hydraulic System
Pump Flow
56.1 gal/min 212 L/min
Relief Valve Pressure
2750.1 psi 18961 kPa
Circle
Rotation
360 degrees 360 degrees
Brakes
Brake Surface - Front
216 in2 0.2 m2
Brake Surface - Rear
7794 in2 5.1 m2
Brake Standards
ISO 3450:1996 ISO 3450:1996
Body Hoists
Pump Flow - High Idle
118 gal/min 118 gal/min
Relief Valve Setting - Raise
2750 psi 2750 psi
Body Raise Time - High Idle
7.5 s 7.5 s
Body Lower Time - Float
10 s 10 s
Body Power Down - High Idle
10 s 10 s
Relief Valve Setting - Lower
500 psi 500 psi
Final Drives
Planetary Ratio
4.80:1 4.80:1
Differential Ratio
2.74:1 2.74:1
Total Reduction Ratio
13.14:1 13.14:1
Operating Specifications
Nominal Payload Class (100%)
103200 lb 46810.7 kg
Top Speed - Loaded
49.2 mph 79.2 km/h
Body Capacity - Sae 2:1
40.8 yd3 31.2 m3
Target Payload Capacity
103200 lb 46810.7 kg
Maximum Payload Class (110%)
113400 lb 51437.4 kg
Not To Exceed Payload (120%)
123800 lb 56154.7 kg
Service Refill Capacities
Cooling System
33 gal 125 L
Differential - Final Drives
47 gal 178 L
Steering Tank
14.5 gal 54.9 L
Steering System - Including Tank
23 gal 87.1 L
Torque Converter - Transmission System
17 gal 64.4 L
Brake/Hoist Hydraulic Tank
38 gal 143.9 L
Brake Hoist System
60 gal 227.2 L
Weight Distributions - Approximate
Front Axle - Empty
51.4 % 51.4 %
Front Axle - Loaded
34.2 % 34.2 %
Rear Axle - Empty
48.6 % 48.6 %
Rear Axle - Loaded
65.8 % 65.8 %
Weights - Approximate
Target Gross Machine Operating Weight
181000 lb 82100.3 kg
Chassis Weight
59223 lb 26863.2 kg
Body Weight
17306 lb 7849.9 kg
Target Gross Machine Weight
181000 lb 82100.3 kg
Capacity - Dual Slope - 100% Fill Factor
Heaped 2:1 (Sae)
40.8 yd3 31.2 m3
Capacity - Flat Floor - 100% Fill Factor
Heaped 2:1 (Sae)
40.9 yd3 31.3 m3
Rops
Rops Standards
ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
Fops Standards
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.
Sound
Sound Standards (3)
Operator Equivalent Sound Pressure Level (Leq) is 74 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. Operator Equivalent Sound Pressure Level (Leq) is 74 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
Sound Standards (1)
Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Standards (2)
Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 115 dB(A). Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 115 dB(A).
Suspension
Rear Axle - Oscillation
8.9 degrees 8.9 degrees
Empty Loaded Cylinder Stroke Front
9.2 in 233.7 mm
Empty Loaded Cylinder Stroke Rear
5.8 in 147.4 mm