Engine
Engine Manufacturer
John Deere PowerTechu2122 PSS 13.5L John Deere PowerTechu2122 PSS 13.5L
Compression Ratio
16:0:1 16:0:1
Rated Power
470 hp 350.5 kw
Displacement
824 cu in 13.6 L
Max Power
517 hp 385.6 kw
Aspiration
Dual series turbocharger w/fixed geometry first stage-variable geometry second stage - air-toair aftercooling and cooled exhaust gas recirculation Dual series turbocharger w/fixed geometry first stage-variable geometry second stage - air-toair aftercooling and cooled exhaust gas recirculation
Rated Pto Power
335 hp 249.9 kw
Power Boost (Available In Transport And/Or Mobile Pto Applications)
10 percent 10 percent
Bore And Stroke
5.2 in. (132 mm) x 6.5 in. (165 mm 5.2 in. (132 mm) x 6.5 in. (165 mm
Capacities
Fuel Tank - Diesel
400 gal 1514.2 L
Crankcase Oil Volume
12.7 gal 48.1 L
Cooling System
14.9 gal 56.5 L
Hydraulic/Transmission/Axle Oil Without 3-Point Rear Hitch And Pto
58 gal 219.6 L
Hydraulic/Transmission/Axle Oil With 3-Point Rear Hitch And Pto
60 gal 227.2 L
Electrical
Alternator (12-V)
200 amps / 12 Volt u2013 240 amps / 12 Volt optional 200 amps / 12 Volt u2013 240 amps / 12 Volt optional
Battery
925 CCA-3 925 CCA-3
Fuel System
Description
Electronically controlled, electronic unit injectors (self priming) Electronically controlled, electronic unit injectors (self priming)
Filter Primary
10 micron replaceable cartridge w/water indication sensor and drain 10 micron replaceable cartridge w/water indication sensor and drain
Filter Secondary
2 micron spin-on element 2 micron spin-on element
Filter System
Two Stage with water separator and service indicator light Two Stage with water separator and service indicator light
Steering
Hydraulic Power-Steering
Standard Standard
Active Command Steering (Acs)
Available Available
Transmission
Description
e18u2122 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manageru2122 e18u2122 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manageru2122
Hydraulic
Maximum Operating Pressure
2900 psi 19994.8 kPa
Scv Control
4 - 6 factory, up to 8 field installed 4 - 6 factory, up to 8 field installed
Axles
Description
Bull gear and double idler with floating pinion. Bull gear and double idler with floating pinion.
120 Mm Flanged
Standard Standard
Rear Axle Supports
Available (with 30 or 36 in. tracks) Available (with 30 or 36 in. tracks)
Front Axle Supports
Available (with sprayer tanks or dozer blade) Available (with sprayer tanks or dozer blade)
Wheelbase Option (Cct) 1
Wheelbase Length
4154 in 105511.6 mm
Turning Radius
21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
Hydraulic
Maximum Pump Flow With Base Hydraulics
58 gal/min 219.6 L/min
Maximum Pump Flow: High-Flow
115 gal/min 435.4 L/min
Available Flow At A Single Scv - 1 /2 In Coupler
35 gal/min 132.5 L/min
Available Flow At A Single Scv With High-Flow - 3 /4 In Coupler
42 gal/min 159 L/min
Description
Closed-center, pressure/flow compensated Closed-center, pressure/flow compensated
3-Point Hitch
Description
Electric-Hydraulic 3-Point Hitch with Draft Sensing Electric-Hydraulic 3-Point Hitch with Draft Sensing
Category 4n/3 With Quik-Coupler
Available: 15000 lb (6804 kg) , Available: 20000 lb (9072 kg) , Available: 15000 lb (6804 kg), Available: 20000 lb (9072 kg) Available: 15000 lb (6804 kg) , Available: 20000 lb (9072 kg) , Available: 15000 lb (6804 kg), Available: 20000 lb (9072 kg)
