This is a Breadcrum

John Deere 953K Feller Buncher Dimensions & Specs

Picture of a John Deere 953K Feller Buncher
Picture of a John Deere 953K Feller Buncher
Picture of a John Deere 953K Feller Buncher

Transport a John Deere 953K Feller Buncher

Transporting a John Deere 953K Feller Buncher is a process that involves multiple steps, each requiring careful attention and expertise. First, the John Deere 953K Feller Buncher is prepared for transport, which may involve disassembling larger components and securing fragile parts.During the loading phase, special equipment like forklifts or cranes may be used

Read more

Dimensions

Dimensions
HTail Swing Radius
10.6 ft in
Overall Machine Length*
251.5 in
Overall Machine Width Without Bucket: Narrow Tracks - 380 Mm (14.9 In) Shoes
87.2 in
Overall Machine Width Without Bucket: Standard Tracks - 480 Mm (19.7 In) Shoes
91.2 in
Ramp Angle
29 degrees
Reach At Full Lift Height And 45 Degrees Dump*
47 in
Maximum Rollback/Dump - Fully Raised
52 degrees/53 degrees
Overall Machine Height - Bucket Fully Raised
183.7 in
Bucket Height - Carry Position
21.6 in
Carry Position Approach Angle
15 degrees
Clearance At Full Lift Height And 45 Degrees Dump*
106 in
Digging Depth*
5.5 in
Grading Angle
74 degrees
Note
*With general purpose bucket and extra duty teeth.
Height - Bucket Hinge Pin
142.1 in
Height - Top Of Stack
110.3 in
Machine Height - Top Of Cab
124.2 in
Maximum Rollback - Ground/Carry Position
43 degrees/50 degrees
Undercarriage
FTrack Gauge
6.03 ft in
Track Shoe Width - Standard
18.9 in
Ground Contact Area - Optional Shoe
2790 in2
Ground Contact Area - Standard Shoe
3410 in2
Ground Pressure - Optional Shoe
10.9 psi
Ground Pressure - Standard Shoe
8.6 psi
Ground Pressure(1) - Optional Shoe
11.1 psi
Ground Pressure(1) - Standard Shoe
8.8 psi
Grouser Height - Double Grouser
1.4 in
Track On Ground
91.3 in
Track Rollers/Shoes - Each Side
Jun-37
Track Shoe Width - Optional
14.9 in
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.

Specifications

Engine
Number Of Cylinders
6
Engine Make
2240
Engine Model
PowerTech Plus 6090H
Gross Power
330 hp
Net Power
286 hp
Net Torque
1026.7 lb ft
Displacement
549 cu in
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final or China Nonroad Stage III, India Bharat III, Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
Engine Model
Cat C7.1 ACERT
Flywheel Power
154 hp
Note (1)
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power - Rated - Iso 9249 (Din)
156 hp
Net Power (Rated) - Sae J1349/Iso 9249
154 hp
Operational
Operating Weight
33852 lb
Fuel Capacity
295 gal
Hydraulic System Fluid Capacity
82 gal
Swing Speed
6 rpm
Operating Voltage
24 V
Max Speed
1.2 mph
Weights
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Operating Weight(1)
34484 lb
Buckets
Capacity - General Purpose
2.4 yd3
Capacity - Multi-Purpose
2.1 yd3
Capacity - Performance Series
2.5 yd3
Width - General Purpose
97.8 in
Width - Performance Series
99.8 in
Width - Multi-Purpose
97.3 in
Note
Buckets equipped with teeth and segments.
Service Refill Capacities
Fuel Tank
70 gal
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Def Tank(1)
4.2 gal
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
General
Note
For complete machine specifications and available configurations, please see your Cat dealer or look on this website.

Need to transport this equipment?

Click below to get an estimate on shipping this equipment