Engine
Engine Manufacturer
Cummins QSX15 Cummins QSX15
Compression Ratio
17.2:1 17.2:1
Lubrication
Full-pressure, full-flow filtration with bypass Full-pressure, full-flow filtration with bypass
Rated Power
570 hp 425.1 kw
Displacement
912 cu in 15 L
Max Power
628 hp 468.3 kw
Aspiration
Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation
Rated Pto Power
335 hp 249.9 kw
Power Boost (Available In Transport And/Or Mobile Pto Applications)
10 percent 10 percent
Bore And Stroke
5.39 in (137mm) x 6.65 in (169mm) 5.39 in (137mm) x 6.65 in (169mm)
Capacities
Fuel Tank - Diesel
400 gal 1514.2 L
Crankcase Oil Volume
11.5 gal 43.6 L
Cooling System
16.3 gal 61.8 L
Hydraulic/Transmission/Axle Oil Without 3-Point Rear Hitch And Pto
59 gal 223.4 L
Electrical
Alternator (12-V)
200 amps / 12 Volt u2013 240 amps / 12 Volt optional 200 amps / 12 Volt u2013 240 amps / 12 Volt optional
Battery
925 CCA-4 925 CCA-4
Fuel System
Description
High Pressure Common Rail (self priming) High Pressure Common Rail (self priming)
Filter Primary
7 micron spin-on style with water in fuel sensor an 7 micron spin-on style with water in fuel sensor an
Filter Secondary
3 micron spin-on element 3 micron spin-on element
Filter System
Two Stage with water separator and service indicator light Two Stage with water separator and service indicator light
Steering
Hydraulic Power-Steering
Standard Standard
Active Command Steering (Acs)
Available Available
Transmission
Description
e18u2122 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manageru2122 e18u2122 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manageru2122
Hydraulic
Maximum Operating Pressure
2900 psi 19994.8 kPa
Scv Control
4 Standard, 6 Available 4 Standard, 6 Available
Axles
Description
Bull gear and double idler with floating pinion. Bull gear and double idler with floating pinion.
120 Mm Flanged
Standard Standard
Rear Axle Supports
Standard Standard
Front Axle Supports
Standard Standard
Wheelbase Option (Cct) 1
Wheelbase Length
4154 in 105511.6 mm
Turning Radius
21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
Hydraulic
Maximum Pump Flow With Base Hydraulics
58 gal/min 219.6 L/min
Maximum Pump Flow: High-Flow
115 gal/min 435.4 L/min
Available Flow At A Single Scv With High-Flow - 3 /4 In Coupler
42 gal/min 159 L/min
Description
Closed-center, pressure/flow compensated Closed-center, pressure/flow compensated
